Brother International PDP350CJ Owner's Manual - English - Page 247

Drawing can align objects to the grid even if the grid is hidden. "To show or hide the grid: 1. Choose Grids from the Options menu. The following dialog box appears: You can also set the distance between grid lines. Decreasing the size increments gives you finer control when you snap objects to the grid. If you select the Snap to Grid option is selected, Drawing aligns objects to the grid automatically. 2. Select Show Grid to show the grid. OR Deselect Show Grid to hide the grid. 3. Click on Apply. Drawing applies your changes. 4. Click on Close to close the dialog box. "To set the grid spacing: 1. Choose Grids from the Options menu. The following dialog box appears: You can set the grid spacing from zero to 455 inches. 2. Select the units of measure (Inches, Centimeters, Points, or Picas) if you want. By default, the units of measure are the same as the ruler setting. 3. Select the distance between grid lines. 4. Click on Apply to apply your changes. Drawing changes the grid spacing to the setting you specified. 5. Click on Close to close the dialog box. Drawing 232