Sony XVS-7000 Users Guide - Page 131

Reducing, enlarging, rotating, and moving keys (device control block) Channel selection buttons FINE button Mode selection buttons LOC SIZE button X, Y, Z buttons RSZR ON button Z-ring ROT button Trackball ASP PERS button Device control block (trackball) 1 Press the [M/E1] button. The [M/E1] button turns on green, and the M/E-1 bank switches to resizer operation mode. Notes • Pressing the [M/E1] to [M/E5] and [P/P] mode selection buttons switches the selected bank to resizer operation mode. • You can select more than one button. The first selected button becomes the reference, and is lit green. Subsequent selected buttons are lit amber. 2 Press the [K1RSZ] button. The [K1RSZ] button turns on green, and key 1 becomes the target of resizer operation. Notes • The [K1RSZ] to [K8RSZ] channel selection buttons correspond to key 1 to key 8. • You can select more than one button. The first selected button becomes the reference, and is lit green. Subsequent selected buttons are lit amber. 3 Press the [RSZR ON] button, turning it on. The target resizer is enabled. 4 Select the function to be set. To change the aspect ratio of the key: Press the [ASP PERS] button, turning it on. To reduce/enlarge or move the key: Press the [LOC SIZE] button, turning it on. To rotate or change the perspective of the key: Press the [ROT] button, turning it on. To specify the direction of rotation, press the [X] button or [Y] button. To adjust perspective, press the [Z] button. 5 Use the trackball or Z-ring for the operation. Pressing the [FINE] button, turning it on, enables fine adjustment of setting values (fine mode). Pressing the [X], [Y], or [Z] button, turning it on, restricts operation to the selected axis or item. The target bank and resizer, and the current parameter and its value, are displayed in the display of the device control block. The functions assignable to trackball and Z-ring operations are shown in the following table. Operation buttons (Parameter) ASP PERS (ASP) LOC SIZE (LOC SIZE) ROT (ROT PERS) Trackball Trackball (horizontal (vertical rotation) rotation) Z-ring [X] button [Y] button [Z] button Change Change Change aspect ratio aspect ratio aspect ratio on X- and Y-axes on X-axis on Y-axis simultaneously Move image Move image Magnify and shrink on X-axis on Y-axis image Rotate Rotate Change distance of image on Y- image on X- viewpoint position axis axis To enter parameters Operates identically to DME three-dimensional parameter input. For details, see "Three-Dimensional Parameter Entry" (page 227). To reset parameters Operates identically to DME three-dimensional parameter reset. For details, see "Resetting three-dimensional parameters" (page 227). To return the resizer to default state (clear work buffer) To clear and reset to default state only the two-dimensional transform and rotation parameters contained in the work buffer, depending on the resizer operation, press the [CLR WORK BUFR] button in the device control block. 131