Sony XVS-7000 Users Guide - Page 239

You can adjust the size of the pattern using the [Size] parameter. To set the pattern size and position 1 In the Wipe Crop menu (4116), press [Position/Size]. 2 Set the following parameters. No. Parameter Adjustment 1 H Horizontal position 2 V Vertical position 3 Size Pattern size 5 Pattern Pattern number Note When pattern number 304 is selected, the group effect varies according to the [Size] parameter setting. To invert the regions with video signal inserted and not inserted In the DME >Edge >Wipe Crop menu (4116), press [Invert], turning it on. To set the radius of pattern corners You can set the radius of the four corners when wipe pattern 304 is selected. Note This setting is available only when the signal format is 1080i. 1 In the Wipe Crop menu (4116), press [Radius]. 2 Set the following parameter. No. Parameter Adjustment 1 Radius Corner radius Setting the aspect ratio of the wipe crop pattern (Aspect) 1 In the Wipe Crop menu (4116), press [Aspect]. 2 Set the following parameters. No. Parameter Adjustment 1 Aspect Aspect ratio a) a) When a minus value is specified, the picture is extended in the vertical direction. When a plus value is specified, the picture is extended in the horizontal direction. Rotating the wipe crop pattern (Rotation) 1 In the group of the Wipe Crop menu (4116), select one of the following. Angle: Incline the pattern at a fixed angle. Speed: Rotate the pattern at a set speed. 2 Depending on the selection in step 1, set the following parameters. When [Angle] is selected No. Parameter Adjustment 1 Angle Rotation angle of pattern a) a) -1.00 is one rotation in the counterclockwise direction. +1.00 is one rotation in the clockwise direction. 0.00 is no rotation. When [Speed] is selected No. Parameter Adjustment 1 Speed Rotation speed of pattern a) a) -100.00 is four rotations per second in counterclockwise direction. +100.00 is four rotations per second in clockwise direction. 0.00 is in stationary state. Applying modulation to the wipe crop pattern (Modulation) 1 In the group of the Wipe Crop menu (4116), select one of the following. H: Modulate the pattern to apply waving in the horizontal direction. V: Modulate the pattern to apply waving in the vertical direction. 2 Set the following parameters. No. Parameter Adjustment 1 Amplitude Amplitude of modulation 2 Frequency Frequency of modulation 3 Speed Speed of ripples Replicating the wipe crop pattern (Multi) 1 In the Wipe Crop menu (4116), press [Multi], turning it on. 2 Set the following parameters. No. Parameter Adjustment 1 H Multi Number of repetitions of pattern horizontally 239