Sony XVS-7000 Users Guide - Page 432
Setting the Macro Operation Mode, Setting the Operation Mode of the, Cross-Point Control Block Button
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 432 highlights
Setting the sensitivity when recalling a menu using button double-press In the group, select one of the following. Fast: High speed Normal: Normal Slow: Low speed Setting the Macro Operation Mode In the Engineering Setup >Panel >Operation menu (7326), press [Macro] to open the Macro menu (7326.6). Configure each function, as required. Setting the macro execution mode In the group, select one of the following. Normal: Set normal execution mode. Step: Set step execution mode. Enabling simultaneous multiple macro execution Press [Macro Multi Mode], turning it on. Macro multi mode is enabled. Setting button actions when configuring macro attachments In the group, select one of the following. With Btn Function: Simultaneously execute button function. W/o Btn Function: Do not execute button function. Setting the action during macro execution or when a macro is paused if the same macro is recalled In the group, select one of the following. Continue: If the macro is recalled by operation of the same button that executed a macro attachment, resume execution of a paused macro or continue execution of an executing macro as-is. If the macro is recalled by any method other than a macro attachment, execution starts from the first event. Cancel: Stop the executing macro or paused macro. Setting the action during macro execution or when a macro is paused if another macro is recalled In the group, select one of the following. Disable: Ignore the other macro recall. Enable: Stop the executing macro or paused macro, and execute the other macro. Note When multi mode is enabled and macros are recalled using buttons for which simultaneous execution is supported, the settings in the group are disabled. Other macros are also executed simultaneously. Setting the enable/disable macro attachment configuration mode In the group, select one of the following. Manual: Enable/disable using the [MACRO ATTACH ENABLE] button on the cross-point pad of the crosspoint control block or the button assigned with the "Macro Attachment Enbl" utility command. Enable: Always enable macro attachments. Disable: Always disable macro attachments. Setting cross-point buttons with a macro attachment to be lit continuously Press [Attchd Btn Indication], turning it on. When macro attachments for the cross-point control block are enabled, cross-point buttons with a macro attachment are always lit green. Setting the Operation Mode of the Cross-Point Control Block Button Rows 1 In the Engineering Setup >Panel >Operation menu (7326), press [Xpt Module Operation]. The Xpt Module Operation menu (7326.12) appears. 2 In the group, select the target bank to set. 3 In the group, select one of the following. Key Bus: Use the 1st row and 2nd row as cross-point button rows for the bus/function selected by a delegation button on the cross-point pad (key bus mode). Use the 3rd row as a cross-point button row for background A bus, and the 4th row for background B bus. Free Assign: Use the 1st row to 4th row as cross-point button rows for the bus/function selected by a delegation button on the cross-point pad (free assign mode). Key Deleg/AUX: Use the 1st row as a delegation button row, and the 2nd row as a cross-point button row for the bus/function selected by a 1st row button (key/AUX bus delegation mode). Use the 3rd row as a cross-point button row for background A bus, and the 4th row for background B bus. 432