Sony XVS-7000 Users Guide - Page 33
Independent Key Transition Control Block, MCRO TAKE macro take button
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
MCRO TAKE (macro take) button (Assignment in the Setup menu is required.) Executes a macro take operation. This can only be assigned to the four buttons on the left. External device operation buttons (Assignment in the Setup menu is required.) These buttons are used to control playback, stop, and cueup operations on connected devices. These can only be assigned to the four buttons at the top. • PLAY button • STOP button • CUE button For details about operation of external devices, see "Control of VTRs and Disk Recorders" (page 286). b Transition execution section This section is used to execute transitions and check the progress of the transition. Transition indicator Fader lever Lock button Transition rate display TAKE button Name Fader lever Transition indicator Transition rate display TAKE button Description • Move this up or down to carry out the transition. • Press the [KF] button, turning it on, to enable the fader lever to be used as a keyframe fader. • Pressing the lock button splits the fader lever into two for use as split faders. For details, see "Split Fader" (page 97). Displays the transition progress using LEDs. Displays the configured transition rate (the time from the beginning of a transition to its completion). • Executes an auto transition with the set transition rate and transition type. • During the transition, the button is lit amber. • You can also assign a function to the transition type selection buttons, [KF] button, [CUT] button, and [MCRO TAKE] button in the Setup menu. For details, see "Setting Transition Control Block Button Assignments" (page 410). Independent Key Transition Control Block The independent key transition control block is used to execute independent key transitions. 33