Sony XVS-7000 Users Guide - Page 255

To set the position of the border between the original and reflection 1 Press [Position]. 2 Set the following parameters. No. Parameter Adjustment 1 H Horizontal border position 2 V Vertical border position Multi Mirror Settings You can set the width of the original, the center position of the original, the offset of the image with fixed mirrors, the direction of the mirrors, and other parameters. Applying the Multi Mirror effect In the Non Linear >Multi Mirror menu (4141.14), set the following parameters. No. Parameter Adjustment 1 Interval H Horizontal distance between mirrors (original width) 2 Offset H Horizontal offset of image with fixed mirrors 3 Interval V Vertical distance between mirrors (original width) 4 Offset V Vertical offset of image with fixed mirrors 5 Angle Mirror angle To set the center position of original image 1 Press [Position]. 2 Set the following parameters. No. Parameter Adjustment 1 H Original image center position in horizontal direction 2 V Original image center position in vertical direction Kaleidoscope Settings You can set the number of blocks, the partition reference point and angle, horizontal and vertical offsets, a reflection position, and other parameters. Applying the Kaleidoscope effect In the Non Linear >Kaleidoscope menu (4141.15), set the following parameters. No. Parameter Adjustment 1 Number Number of blocks 2 Phase Angle of partition reference point 3 Offset H Horizontal offset 4 Offset V Vertical offset To reflect the kaleidoscope image as if in a mirror To reflect in the horizontal direction, press [Mirror H], turning it on. To reflect in the vertical direction, press [Mirror V], turning it on. To set the reflection position 1 Press [Position]. 2 Set the following parameters. No. Parameter Adjustment 1 H Horizontal reflection position 2 V Vertical reflection position To cyclically repeat part of the original and its reflection Press [Cyclic], turning it on. Lens Settings You can set the shape and aspect ratio of the lens, the angle, the magnification ratio, the curvature, the size, the center position, and other parameters. You can also choose to display only the portion of the image that is seen through the lens. Applying the Lens effect 1 In the group of the Non Linear >Lens menu (4141.16), select the lens shape. Circle: Circular shape Rectangle: Rectangular shape Star: Star shape Heart: Heart shape Bar: Bar shape Cross: Cross shape 2 Set the following parameters, according to the selected lens shape. 255