Sony XVS-7000 Users Guide - Page 489

Deleting Tally Copy 1 In the Engineering Setup >Router/Tally >Tally Copy menu (7365), select the tally copy. 2 Press [Delete]. Parallel Tally Settings You can configure the parallel port on which to output tally information for each source and destination. For each tally output port, specify the source address or destination level and address, and the tally type. Configuring/Modifying Parallel Tally 1 In the group of the Engineering Setup >Router/Tally >Parallel Tally menu (7366), select one of the following. DCU1: Set the SIU1 (DCU function) parallel tally. DCU2: Set the SIU2 (DCU function) parallel tally. 2 Select the slot number and port number. No. Parameter Adjustment 1 Slot No Parallel tally slot number 2 Port No Parallel tally port number Note On the MKS-X2700, select 2 for the slot and a value in the range 1 to 36 for the port. 3 Press [Set]. The Set menu (7366.1) appears. 4 In the group, select the tally type. Src: Return a tally to all sources that are output to the destination. Dest: Return a tally to destinations outputting sources that return a tally using source tally. 5 Set the address and level. The level setting is only required when [Dest] is selected in step 4. No. Parameter Adjustment 1 Address Source/destination address 2 Level Destination level 6 Set the tally type. 489