Sony XVS-7000 Users Guide - Page 283
P-Bus Trigger, Clearing an action setting, Setting the action for a rewind operation
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 283 highlights
2 Select the ID (0 to 23) of the device you want to set. 3 Select the action. You can select "2" (Store), "3" (Recall), or "4" (Trigger). 4 Set the register number or trigger number. No. Parameter Adjustment 3 a) Store No Register number for Store Recall No Register number for Recall Trigger No Trigger number a) The parameters will vary depending on the selected action. 5 Press [Set]. To set other devices, repeat steps 2 to 5. To test an action command output Press [Test Fire]. The action command is output from the port of the SIU. Clearing an action setting 1 In the Device >P-Bus Timeline >P-Bus Timeline menu (5321), select the ID of the device for which you want to clear the setting. 2 In the list on the right, select "1" (Off). 3 Press [Set]. To clear the settings for all devices Press [All Off]. Setting the action for a rewind operation On the P-Bus timeline, when the [REWIND] button in the utility/shotbox control block is pressed the action set for the first keyframe is not executed; when the [RUN] button is pressed, then the first keyframe action is executed. To execute an action when the [REWIND] button is pressed, it is necessary to set this action (Rewind Action). To set the Rewind Action, press [Rewind Action] in the Device >P-Bus Timeline >P-Bus Timeline menu (5321) to open the Rewind Action menu (5321.1). Operate in the same way as in the P-Bus Timeline menu (5321), and press [Rewind Action Set] to carry out the setting. Alternatively, you can make settings in the Setup menu so that when the [REWIND] button is pressed, this executes the action set for the first keyframe, and when the [RUN] button is pressed the first keyframe action is not executed. In this case, the Rewind Action setting is still valid. For details, see "Setting the first keyframe when rewind is executed" (page 429). Carrying out a Direct Store You can carry out a Learn with the register number specified for the device selected in the menu. 1 In the Device >P-Bus Timeline >P-Bus Timeline menu (5321), select the ID of the device. 2 Press [Direct Store]. 3 Enter the register number (1 to 4095) for which you want to carry out the Learn in the numeric keypad window. 4 Press [Enter]. P-Bus Trigger "P-Bus trigger" is a function whereby a button operation in the numeric keypad control block or utility/shotbox control block outputs an action command to a P-Bus device. Note To use the P-Bus trigger, the P-Bus control mode must be set to [Trigger] in the Setup menu (see page 427). The relation between the operation in each of the control blocks and the action command output is as follows. Action command for an operation in the numeric keypad control block • RCALL: Recall • STORE: Store This recalls the register specified in the numeric keypad control block, and a Recall or Store is carried out, according to the setting. Action command for an operation in the utility/ shotbox control block • RUN: Trigger 1 • REWIND: Trigger 4 • NEXT KF: Trigger 7 • PREV KF: Trigger 8 Outputting an action command This section describes how to output a Recall as an example. 1 In the numeric keypad control block, press the [EFF] button. The control block switches to effect operation mode, and the [EFF] button and [RCALL] button light amber. 2 Press the [P-BUS] button to select the P-Bus region. 283