Sony XVS-7000 Users Guide - Page 206

Item Snapshots Cross-point hold Main Utility 2 cannot be set Sub • Utility 3 is added. • BKGD A/B and Key1 cannot be set. a) Key 2 to key 8 are common on both main and sub. Notes • Allow a transition to complete before carrying out main and sub delegation switching. • The sub bank background A bus (utility 2 bus) is shared with wipe edge border fill. Making a change to one affects the other. • Even if the wipe border width is set to the same numeric value for main and sub, the same image is not obtained. Multi Program 2 Mode Restrictions • The following functions are not available on the sub bank. - Data copy and swap - Default recall (except for parametric recall) - [AUTO PVW] button (button assigned with the "Auto Preview" utility command) - Split fader • In Region Simul mode, the control target region on the sub side is the same region as on the main side. • In the following cases, a transition using the fader lever may not be performed correctly: - When the main and sub bus toggle modes are set differently - For a pattern mix, preset color mix, and so on • For an Internal bus link or External bus link, the "Utility 2" bus cannot be selected. • Show key and [MACRO ATTACH ENABLE] button settings are common to main and sub. • If a snapshot is recalled simultaneously for main and sub or a keyframe is executed simultaneously for main and sub, then the settings on the main bank are reflected in the following shared data on main and sub. - Keys - M/E Config - DME external video bus and utility 1 bus • When a macro attachment is set on the DME utility 1 bus or DME utility 2 bus, it is not possible to make separate main and sub settings. • When snapshots with different M/E Config settings are recalled: - If M/E Config data is not to be included in the snapshot data, the current system settings are used for snapshot reproduction. - If M/E Config data is to be included in the snapshot data, first M/E Config data is set and then other snapshot data is recalled. • The bus override function is only available on the following buses: - M/E-1 to M/E-5 Main BKGD A/B buses - M/E-1 to M/E-5 Sub BKGD A/B buses (Util 2, Util 3 bus) - P/P Main PGM/PST bus - P/P Sub PGM/PST bus (Util 2, Util 3 bus) • When a master snapshot or master timeline is executed with a key assigned to both main and sub, it is uncertain which data will be reflected. • When recalling a master snapshot with different register numbers for main and sub, the recall timing may differ by one field or more between main and sub. • The link state is maintained even when M/E Config is changed. Set the link setting again, as required. • Since key 2 to key 8 are shared between main and sub, if the main and sub fader lever positions are different and you move the fader lever, the video changes instantaneously to the value of the most recently moved fader lever. • When the transition type for main or sub is set to preset color mix, it is not possible to carry out independent key transition operation (common to main and sub). • Up to two background buses (on main and/or sub banks) can set an image effect. 206