Sony XVS-7000 Users Guide - Page 330

• It is not possible to add temporary attributes to a master snapshot. 5 Press the [ENTER] button. The specified snapshot is recalled. When a master snapshot is recalled, the region selection buttons are lit according to the saved region information. To cancel a snapshot recall operation To cancel the snapshot recall, press the [UNDO] button. Note It is not possible to cancel recalling of a master snapshot. Creating and saving a master snapshot Use the same procedure for creating and saving a master timeline. For master snapshot operations, use the [SNAPSHOT] button instead of the [EFF] button. For details, see "Creating and Saving a Master Timeline (Numeric Keypad Control Block)" (page 321). Snapshot Operations (Flexi Pad Control Block) In the Flexi Pad control block on each M/E bank and PGM/ PST banks, you can only carry out operations on snapshots for that bank. SNAPSHOT button DEL button UNDO button Bank selection buttons Memory recall section Flexi Pad control block Banks and Registers To allow operations on the 250 registers, the Flexi Pad control block treats the registers in groups. These groups are called "banks." There are 26 banks, numbered 0 to 25, and the following registers correspond to each bank. Bank number Bank 0 Bank 1 Bank 2 Bank 3 Bank 4 Bank 5 Bank 6 Bank 7 Register number 1 to 9 10 to 19 20 to 29 30 to 39 40 to 49 50 to 59 60 to 69 70 to 79 Bank number Bank 13 Bank 14 Bank 15 Bank 16 Bank 17 Bank 18 Bank 19 Bank 20 Register number 130 to 139 140 to 149 150 to 159 160 to 169 170 to 179 180 to 189 190 to 199 200 to 209 330