Sony XVS-7000 Users Guide - Page 228

Graphics Display Use the DME menu to make graphics display settings. You can make separate settings for separate channels. Select the desired DME channel in the device control block. For the types of graphics displayed, see "Graphics Display" (page 217). Canceling virtual images 1 Open the DME >Input/Output >Video/Key menu (4162). 2 Press [Wrap Around], turning it on. Displaying graphics 1 Open the DME >Input/Output >Graphic menu (4164). 2 Press [Graphic], turning it on. 3 In the group, select the type of graphic. Axis: Displays coordinate axes. Axis Name: Displays axis names. Ch ID: Display Channel IDs. Wire Frame: Displays a wire frame. Grid: Displays a grid. Flex Shadow Axis: Displays the flex shadow center axis. The selected graphic appears on the monitor screen. 4 To shrink the graphics display to show the range not displayed on a normal monitor, press [Scale], turning it on, and set the following parameter. As the value of the setting increases, the picture on the monitor shrinks toward the center. No. Parameter Adjustment 1 Scale Degree to which the graphics display is reduced 5 To automatically erase the graphics display during keyframe execution, press [Auto Erase], turning it on, and then set the following parameter. Virtual image [Wrap Around] enabled No. Parameter Adjustment 1 Recover Time until graphics display appears Time again after keyframe execution Virtual Image Cancelation When a three-dimensional transform is executed with an extreme degree of perspective set for an image, the part of the image exceeding the virtual viewpoint is displayed wrapped around on the monitor screen. This is referred to as a virtual image. Using the DME menu, you can make a setting not to show the virtual images. 228