Sony XVS-7000 Users Guide - Page 476
Parallel Output Settings, Assigning a GPI Output Port, Assignment
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 476 highlights
Parallel Output Settings Output ports that are not used configuring tally can be assigned as GPI output ports in the Engineering Setup >Router/Tally >Tally Enable menu (7364). GPI output is also supported via a network. The GPI output port settings are the same as for parallel output ports. For details, see "GPI output via a network" (page 477). 3 Select the slot number and port number. No. Parameter Adjustment 1 From Slot First port slot 2 From Port First port number 3 To Slot Last port slot 4 To Port Last port number 4 In the group, press [No Assign]. Assigning a GPI Output Port 1 In the group of the Engineering Setup >DCU >Output Config menu (7353), select one of the following. DCU1: Set SIU1 ports. DCU2: Set SIU2 ports. 2 In the group, press [GPI Output]. 3 Select the output port and GPI output number. No. Parameter Adjustment 1 Parallel Output port slot Output Slot 2 Parallel Output port Output Port 5 GPI Output GPI output Note For MKS-X2700 parallel output ports, set 2 for the slot and a value in the range 1 to 36 for the port. 4 Press [GPI Output Set]. Releasing a GPI Output Port Assignment 1 In the group of the Engineering Setup >DCU >Output Config menu (7353), select the target to set (DCU1 or DCU2). 2 If [GPI Output] in the group is lit, press [GPI Output], turning it off. 476