Sony XVS-7000 Users Guide - Page 253

No. Parameter Adjustment 2 Random Degree of jaggedness at block edges Broken Glass Settings You can set the degree of transition, the degree of randomness in the distance moved by each block, the amount of movement, the width of the partitions, the degree of randomness in partition width, the center point, the starting angle, and other parameters. You can also fix the direction in which shards scatter. To apply the Broken Glass effect Open the Non Linear >Broken Glass menu (4141.8). The items and parameters displayed in the Broken Glass menu, excluding [Direction], are the same as for the Rings menu (see page 252). To fix the direction in which shards scatter Press [Direction], turning it on. Flying Bar Settings You can set the degree of transition, the degree of randomness in the distance moved by each block, the direction of movement, the width of the partitions, the degree of randomness in partition width, the partition angle, and other parameters. To apply the Flying Bar effect 1 Open the Non Linear >Flying Bars menu (4141.9). 2 To make transition settings, press [Transition] and set the following parameters. No. Parameter Adjustment 1 Transition Degree of transition 2 Random Degree of randomness in distance moved by each block 3 Angle Direction of movement 3 To set the partition method, press [Partition] and set the following parameters. No. Parameter Adjustment 1 Width Width of partition 2 Random Degree of randomness in partition width 3 Angle Partition angle Blind Settings You can set the number of rotations by blocks, the perspective, the width and position of blocks, the direction, the center position, and other parameters. There are two modes: Bar and Wedge. To apply the Blind effect 1 In the group of the Non Linear >Blind menu (4141.10), select the mode. Bar: Bar mode Wedge: Wedge mode 2 To make transition settings, press [Transition] and set the following parameters. No. Parameter Adjustment 1 Rotation Number of rotations of the blocks 2 Perspective Degree of randomness in distance moved by each block 3 To set the partition method, press [Partition] and set the following parameters. When [Bar] is selected in the group No. Parameter Adjustment 1 Width Width of partition 2 Offset Degree of randomness in partition width 3 Angle Starting angle of effect When [Wedge] is selected in the group No. Parameter Adjustment 4 No Width of blocks 5 Phase Partition position To set the wedge center position When [Wedge] is selected in the group, you can set the wedge center position. 1 Press [Position]. 2 Set the following parameters. No. Parameter Adjustment 1 H Center point in horizontal direction 2 V Center point in vertical direction 253