Sony XVS-7000 Users Guide - Page 193

Router Menu You can carry out router switching operations in the Router menu. Destination Input List Display You can check the list of signals currently input for each destination. Open the Router >Router Control >Router Control menu (5111). For details, see "Setting the Router Operation Mode" (page 417). 1 In the Router >Router Control >Router Control menu (5111), press [Change Xpt]. The Change Xpt menu (5111.1) appears. The destination selection buttons appear by group (16 buttons) at the top. The source selection buttons appear by group (maximum 24 buttons) at the bottom. 2 Select a destination to switch using the destination selection buttons. To change the group Press the [1-16], [17-32], [33-48], or [49-64] button. 3 Select a source using the source selection buttons. To change the group Press the [1-24], [25-48], [49-72], [73-96], [97-120], or [121-128] button. The left side of the status area shows a list for destination assignments. Destination rows for which [Inhibit] is enabled in the Engineering Setup >Panel >Aux Assign >RTR Mode Setting menu (7323.1) appear as gray text. Also, if [PROT] (protect) is set to ON for a source, using a BKS-R3xxx or R1xxx series Router remote control, a padlock icon appears. The right side of the status area shows a list of levels assigned to the level selection buttons ([Level 1] to [Level 4] in the group. Selecting a level In the group of the Router >Router Control >Router Control menu (5111), select a level. Switching the Source for a Destination You can switch the input for each destination directly in the menu. You use the Engineering Setup >Panel >Aux Assign >RTR Mode Setting menu (7323.1) to assign to destination and source buttons. 193