Sony XVS-7000 Users Guide - Page 88

To set the key priority of the keys for after the transition, open the M/E-1 >Misc >Next Key Priority menu (1174). 2 In the group, select the group to display at the front. The selected group button is lit green, indicating that the priority of the keys within the group can be set. 3 In the , , , and groups, select the key for each priority level. The selected keys are set priority 1 to 4. Note It is not possible to select the same key for different priority levels. 4 In the group, select the other group, then select the key for each priority level in the , , , and groups. The selected keys are set priority 5 to 8. The current key priority can be checked on the program monitor for the switcher bank. When the [KEY PRIOR] button is selected in a next transition, the key priority for after the transition can be checked on the preview monitor for the switcher bank. Displaying the Key Output Status and Priority You can check the key status and priority on the display of the transition control block. Key 1 to key 4 status Key 5 to key 8 status Priority Target bank Priority Transition control block display Key output status display When a key is currently inserted, "K1" to "K8" are displayed highlighted. Key priority display The key priority is displayed using the numbers 1 to 8 under the status indicators for each key corresponding to the priority levels 1 to 8. If the [KEY PRIOR] button is selected in a next transition, the priority of keys for after the transition are displayed highlighted on the right of the current priority. The key priority for after the transition is not displayed if the values are the same as the current priority setting. Note Only the priority for after the transition is displayed while setting the priority of keys for after the transition. 88