Sony XVS-7000 Users Guide - Page 462

The conversion format is set in the following groupings, depending on the switcher signal format. • XKS-S9167 - 3840×2160P 2SI or 3840×2160P SQD, and the conversion format is 3840×2160P 2SI 12G, 1080P, 1080i: Groups of 2 outputs 1) - 3840×2160P 2SI or 3840×2160P SQD, and the conversion format is 3840×2160P 2SI 3G, 3840×2160P SQD: Groups of 4 outputs - 1080P, 1080i, 720P: Groups of 4 outputs • XKS-C9121 - 3840×2160P 2SI: Groups of 2 outputs (1st and 2nd, 9th and 10th outputs only) - 1080P: Groups of 4 outputs (1st to 4th, 9th to 12th outputs only) 1) Groups of 4 outputs when the conversion format is initially set to 3840×2160P 2SI 3G or 3840×2160P SQD and then the conversion format is changed Notes • When the switcher signal format is 3840×2160PsF or 1080PsF, output signal format conversion is not available. • When the switcher signal format is 3840×2160P SQD, the output format converter is disabled for output connectors to which multi viewer outputs are assigned. Supported formats The supported conversion formats are given below. Note Field frequency and frame frequency conversion is not supported. Switcher signal format 3840×2160P (Level A, 2SI) 3840×2160P (Level A, SQD) 1080P (Level A) 1080i Output signal format • 3840×2160P (Level A, 2SI) 3G a) b) • 3840×2160P (Level A, 2SI) 12G a) c) • 3840×2160P (Level B, 2SI) 3G b) • 3840×2160P (Level A, SQD) b) • 3840×2160P (Level B, SQD) b) • 1080P (Level A) • 1080P (Level B) b) • 1080i • 3840×2160P (Level A, 2SI) 3G • 3840×2160P (Level A, 2SI) 12G • 3840×2160P (Level B, 2SI) 3G • 3840×2160P (Level A, SQD) a) • 3840×2160P (Level B, SQD) • 1080P (Level A) a) • 1080P (Level B) b) • 1080i • 720P b) • 1080i a) • 720P b) Switcher signal format 720P Output signal format • 1080i b) • 720P a) a) Output signal without format conversion b) Not selectable on the XKS-C9121 c) "3840×2160P (Level A, 2SI)" on the XKS-C9121 1 In the Engineering Setup >Switcher >Output menu (7333), press [Output FC]. The Output FC menu (7333.20) appears. 2 Press [FC Format]. The FC Format menu (7333.21) appears. The status area shows the output list on the left and the supported conversion signal format list on the right. 3 In the list on the left, select the target output to set. Select an output from among the output grouping to set. Note When the switcher signal format is 3840×2160P, only the output with the lowest number in the output grouping can be selected. 4 In the list on the right, select the signal format. 5 Press [Set]. To clear the signal format setting Press [Clear]. 6 Press [Execute]. Setting the format converter conversion method You can set the format converter conversion method for each output. For details about the conversion method items and the target conversion formats, see "Setting the format converter conversion method" (page 461). 1 In the Engineering Setup >Switcher >Output >Output FC menu (7333.20), press [FC Adjust]. The FC Adjust menu (7333.22) appears. 2 Display the target output to set in the status area. Press [Prev] or [Next] to switch the display in the status area. Pressing [Prev] displays the previous four outputs, and pressing [Next] displays the next four outputs. 462