Sony XVS-7000 Users Guide - Page 315

Transition start First transition Transition completion end point Effect execution Image created by interpolation Background A Background B At the first transition completion point, if you move the image with the positioner, the transition appears as follows. Transition start First transition Transition completion end point filled with the signal selected on the DME external video bus. For 3-channel mode brick, the part of the pattern image shown in dark gray is filled with the signal selected on the DME external video bus, and the light gray portion is filled with the signal selected on the DME utility 1 bus. For details about patterns, see "DME Wipe Pattern List" (page 495). Setting the transition mode 1 Open the Key Frame >DME User PGM menu (6114). 2 In the group, select the transition mode according to the DME wipe action. Single: Select single transition mode. Flip Tumble: Select flip tumble transition mode. Dual: Select dual transition mode. P in P: Select picture-in-picture transition mode. Compress: Select compress transition mode. Frame I/O: Select frame in-out transition mode. Frame I/O H: Select frame in-out transition mode in the horizontal direction. Frame I/O V: Select frame in-out transition mode in the vertical direction. For details about user programmable DME, see "Creating User Programmable DME Patterns" (page 166). Note The DME channel selected as the reference region (lit green) in the numeric keypad control block is reflected in the group display. Effect execution Image created by interpolation Background A Background B State before modification Signals forming part of the background for a DME wipe For a 2-channel mode page turn, roll, brick, frame in-out, and so on, the part of the pattern image shown in gray is 315