Sony XVS-7000 Users Guide - Page 59
Basic Menu Operations, Recalling a Menu, Selecting a Menu, Selecting a List Item, Setting Parameters
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Basic Menu Operations Note Some menus and unsupported functions may not appear, depending on the system configuration. Recalling a Menu The following three methods are available for recalling menus. Top menu selection buttons on the menu panel Open the top menu (1st menu level) corresponding menu for each button. Note To select the M/E-4 or M/E-5 menu, a previous assignment in the Setup menu is required (see page 411). Top menu window Specify the menu page number to open the menu. In the same way as the menu panel, you can also open top menus using the top menu selection buttons. For details, see "Top Menu Window" (page 55). Pressing specific buttons twice Open the menu that corresponds to the button. For details, see "Menus Recalled by Pressing a Button Twice" (page 520). Selecting a Menu 1 Display the top menu. 2 Use the VF buttons (left side of screen) to select a 2nd level menu, and then use the HF buttons (bottom of screen) to select the 3rd level menu. 3 Press the appropriate function button within the function button area (center of screen). In this manual, menu selection operations are indicated as "1st level >2nd level >3rd level (menu page number)." Example: To select the Shortcut menu Home >Favorites >Shortcut menu (0021) Returning to the previous menu To return to the last displayed menu, press the previous page button. Selecting a List Item When a list is displayed on the menu screen, use one of the following methods to select an item. • Press the item directly in the list. • Use the arrow keys to scroll the reverse video cursor to the item. • Turn the knob corresponding to the parameter of the item selection. • Press the parameter setting button for the item selection and enter a value for the item using the numeric keypad window. Depending on the menu, you can press [Plural] to select more than one item or [ALL] to select all items. You can also select more than one item using the [Num] parameter. Example: Selecting a snapshot register No. Parameter Adjustment 1 Register Register number selection 2 Num Number to select Setting the [Register] parameter to "2" and the [Num] parameter to "5" will select five registers starting from register 2. Setting Parameters mark The mark on a function button (above) indicates that there are parameters which can be adjusted. When you press these function buttons, you can set the parameters using one of the following methods. • Turn the knob corresponding to each parameter to adjust the value. • Press the parameter setting button corresponding to each parameter, then enter a value in the displayed numeric keypad window. • Using a mouse (see page 60). In this manual, parameter setting operations use the following convention. The "No." column indicates the position (numbered 1 to 5 from the top) of the adjustment knobs on the menu panel and the parameter setting buttons. Example: Setting the key wipe pattern key parameters No. Parameter Adjustment 1 Size Pattern size 2 Soft Degree of edge softness 59