Sony XVS-7000 Users Guide - Page 527
Procedure, Resource Share Setup
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 527 highlights
Resource Share Setup page Logical switcher configuration Resource sharing mode (enable/disable) Logical switcher signal format Physical switcher model File button 2 Configure the logical switcher signal format in [Format]. Signal format settings In [Format], select the signal format for logical switcher 1 in [L-SWR1] and for logical switcher 2 in [L-SWR2]. Field frequency/frame frequency settings Select the frequency in [Frame rate]. Input reference signal settings Select the input reference signal in [Reference]. The combinations of settings that can be selected are as follows. Execute button Logout button Frame memory folder mode Default Recall button Resource assignments Note If resource sharing is disabled, the logical switcher signal format, physical switcher model, resource assignments, and frame memory folder mode are not displayed. Procedure The resource sharing mode and system structure are configured on the Resource Share Setup page. 1 Enable/disable resource sharing mode in [Resource Share Mode]. To enable resource sharing Select [On]. Format Frame rate L-SWR1 L-SWR2 2160P 2SI 2160P 2SI 59.94 2160P SQD 2160P SQD 50 1080P 1080P 1080i 1080i 2160PsF SQD 1080PsF 2160PsF SQD 1080PsF 29.97 25 24 23.98 720P 720P 59.94 50 Reference Tri Sync BB Tri Sync BB Tri Sync Tri Sync BB BB Notes • Set devices in a switcher system to the same frequency. • The [Frame rate] and [Reference] settings are common to logical switchers 1 and 2. • If the signal formats form an unsupported combination, the format is automatically changed to a setting that can be selected. 3 Set the physical switcher model in [Model]. To disable resource sharing Select [Off], and skip to step 6. Select [XVS-9000], [XVS-8000], [XVS-7000], or [XVS-6000]. 4 Configure resource assignments in [Resource Configuration]. 527