Sony XVS-7000 Users Guide - Page 355
Specifying an edit point, Inserting an event, Modifying an event, In the Flexi Pad control block
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 355 highlights
3 While pressing the [MCRO] button, press the button for the target register for operation. This switches the Flexi Pad control block to macro editing mode, and the [MCRO] button changes color to red. The selected bank and register number are displayed on the top right button in the memory recall section, and the number of the current event and total number of events are displayed on the center button in the bottom row. 4 If required, set auto insert mode (see page 354). 5 Create the events (carry out the control panel operations to be registered as events in the macro). You can also include pause events (see page 356). For details about the events that can be registered, see "Events" (page 345). When auto insert mode is enabled, the event is registered automatically. When auto insert mode is disabled, press the [INS] button to register the event. Notes • During macro editing, if you press any of the mode selection buttons in the Flexi Pad control block other than the [MCRO] button, the executed operation is also registered as an event. In this case, the [MCRO] button remains lit red. • While editing a macro in the Flexi Pad control block, pressing a button which has macro attachment does not execute the macro. 6 Repeat steps 4 and 5 to register the required events in the macro. This registers the events in the macro, in the order the operations were carried out on the control panel. 7 Press the [STORE XXX] button (where XXX is the number of the currently selected register). This saves the created macro in the register. To exit macro creation without saving, press the [EXIT] button. Specifying an edit point 1 In the Flexi Pad control block, press the [MCRO] button. This switches the memory recall section to macro operation mode. The last recalled bank is displayed. 2 Use the bank selection buttons to select the target bank for operation. Select from bank 0 to 25 (register number 1 to 250). For details about bank selection, see "Bank and register selection in the Flexi Pad control block" (page 331). 3 While pressing the [MCRO] button, press the button for the target register for operation. This switches the Flexi Pad control block to macro editing mode, and the [MCRO] button changes color to red. The selected bank and register number are displayed on the top right button in the memory recall section, and the number of the current event and total number of events are displayed on the center button in the bottom row. 4 Specify an edit point. • To move the edit point to the event immediately following the current event, press the [>> NEXT] button. • To move the edit point to the event immediately preceding the current event, press the [