Sony XVS-7000 Users Guide - Page 441
Setting User Regions, Assigning PGM/PST Logically to an, Setting DME Channel Assignments
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 441 highlights
Setting User Regions You can assign the following user regions to User1 to User8. • Color background 1 and 2 • AUX1 to 48 • Frame memory 1 to 20 Note If you change the user region settings, the previously stored snapshot data and keyframe effect data can no longer be used. 1 In the Engineering Setup >Switcher >Config menu (7331), press [User1-8 Config]. The User1-8 Config menu (7331.4) appears. The status area shows the region names and assigned user region numbers. 2 Select the target region to set. 3 In the group, select the user region to assign. If you do not want to assign a user region, select [No Assign]. 4 Repeat steps 2 and 3 as required to set other regions. 5 Press [Execute]. 6 Check the message, then press [Yes]. Assigning PGM/PST Logically to an M/E You can configure PGM/PST hardware to be handled logically as an M/E. 1 In the Engineering Setup >Switcher >Config menu (7331), press [Logical M/E Assign]. The Logical M/E Assign menu (7331.5) appears. The status area shows the physical M/E and logical M/E organization. 2 In the group, select one of the following. P/P: Assign the physical PGM/PST as logical PGM/ PST. M/E-1: Assign the physical PGM/PST as logical M/E-1. M/E-2: Assign the physical PGM/PST as logical M/E-2. M/E-3: Assign the physical PGM/PST as logical M/E-3. M/E-4: Assign the physical PGM/PST as logical M/E-4. M/E-5: Assign the physical PGM/PST as logical M/E-5. Setting DME Channel Assignments You can set DME channels to use on the M/E and PGM/ PST banks for processed keys or DME wipes. 1 In the Engineering Setup >Switcher >Config menu (7331), press [DME Config]. The DME Config menu (7331.6) appears. 2 Select the target M/E or P/P bank to set. 3 In the group, select the channel to assign. 4 Repeat steps 2 and 3 as required to make settings for each M/E and PGM/PST bank. Setting the Side Flag Material and Operation This sets the video material (4:3 aspect ratio) for applying side flags. For details about side flags, see "Side Flags" (page 196). Setting the aspect ratio (4:3 or 16:9) 1 In the Engineering Setup >Switcher >Config menu (7331), press [Side Flags]. The Side Flags menu (7331.7) appears. The status area lists the video/key pair numbers, video signal source names, and aspect ratio settings. 2 Select the target pair number to set. To select all of the pair numbers, press [ALL]. 3 In the group, press [4:3]. If you select [16:9], no side flags are applied. To set 4:3 video material to have side flags applied automatically You can make a setting so that when a signal with aspect ratio set to 4:3 is selected in the cross-point control block, side flags are automatically applied. In the Side Flags menu (7331.7), press [Auto Side Flags], turning it on. The settings are common to the M/E and PGM/PST banks. 441