Sony XVS-7000 Users Guide - Page 342

The status area shows the information for the selected shotbox register and the key selection buttons. 3 In the status area, select a switcher bank. To select all switcher banks, press [ALL]. 4 Press a key selection button to select a key. You can select more than one key. 5 Press [Key SS Assign], turning it on, and select a register to register using the following parameter. No. Parameter Adjustment 3 Key Key snapshot register number Snapshot The key selection button shows the selected register number (KSS1 to KSS4). 6 Repeat steps 3 to 5 as required to set all key snapshots to be registered in the shotbox register. 7 In the group, press [Store]. To return to the state before saving the setting In the group, press [Undo]. Shotbox Execution You can execute a shotbox using the numeric keypad control block, Flexi Pad control block, utility/shotbox control block, or cross-point control block. Shotbox Execution (Numeric Keypad Control Block) SHOTBOX button Display Recalling a shotbox register 1 In the Shotbox >Register >Store/Recall menu (6411), select a register. 2 Press [Recall]. If auto run is set for the register, the effects are executed at the same time the register is recalled. Region selection buttons Numeric keypad buttons RCALL button Numeric keypad control block 1 In the numeric keypad control block, press the [SHOTBOX] button. The control block switches to shotbox operation mode, and the [SHOTBOX] button and [RCALL] button light amber. The display shows the last recalled register number. 2 Enter the register number to recall using the numeric keypad buttons. For details about selecting a register, see "Register selection in the numeric keypad control block" (page 305). 3 Press the [ENTER] button. The selected shotbox register is executed. If auto run is set, the effects are executed at the same time they are recalled. The region selection buttons corresponding to the regions for which effects are set turn on. 342