Sony XVS-7000 Users Guide - Page 145
Setting the wipe pattern position, Positioner, When selecting [Multi] and replicating the pattern
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
The Matte Adjust menu (1154.1) appears. 2 In the group, select [Mix Color]. 3 In the group, select one of the following. Wipe: Wipe pattern selected for a transition Pattern: Use a dedicated pattern. 4 Depending on the selection in step 3, set the following parameters. When [Wipe] is selected No. Parameter Adjustment 1 Size Pattern size 2 Soft Edge softness When [Pattern] is selected No. Parameter Adjustment 1 Size Pattern size 2 Soft Edge softness 3 Pattern Pattern number a) a) The patterns are the same as standard wipe patterns 1 to 24. You can also make a pattern selection by pressing [Mix Pattern Select] in the Matte Adjust menu to display the Mix Ptn Select menu (1154.2). Press the desired pattern (1 to 24) to select it, and set the [Size] and [Soft] parameters. 5 If a pattern is selected in step 4, set the pattern modifiers as required. When selecting [Position] and setting the pattern position No. Parameter Adjustment 1 Position H Horizontal position a) 2 Position V Vertical position a) a) See page 145. When selecting [Multi] and replicating the pattern No. Parameter Adjustment 1 H Multi Number of repetitions of pattern horizontally 2 V Multi Number of repetitions of pattern vertically 3 Invert Type Pattern layout a) a) See page 147. When selecting [Aspect] and adjusting the pattern aspect ratio No. Parameter Adjustment 1 Aspect Aspect ratio a) a) See page 146. When selecting [Angle] in the group and slanting the pattern No. Parameter Adjustment 1 Angle Rotation angle of pattern a) a) See page 146. When selecting [Speed] in the group and rotating the pattern at a constant speed No. Parameter Adjustment 1 Speed Rotation speed of pattern a) a) See page 146. 6 Select [Color 1] and [Color 2], respectively, and set the colors. No. Parameter Adjustment 1 Luminance Luminance 2 Saturation Saturation 3 Hue Hue 7 To interchange color 1 and color 2, press the [Color Invert] button, turning it on. Setting the wipe pattern position (Positioner) Move the pattern to a desired position. Positioner disabled Positioner enabled 1 Open the M/E-1 >Wipe >Main Modify menu (1155). 2 In the group, press [Position] and set the pattern position. No. Parameter Adjustment 1 Position H Horizontal position • Negative values move left. • Positive values move right. 145