Sony XVS-7000 Users Guide - Page 529
To display File Manager, To log out from Resource Share Setup
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 529 highlights
Frame memory output settings Click/tap [Select] for [FM (ch)] to display the pop-up window. Select [1] or [2] for each group of four channels. Select both [1] and [2] to share on logical switchers 1 and 2. Note In 4K format, the resources for the four channels are used as frame memory outputs for one channel. On a 4K format logical switcher, set an even number of frame memory output channels (2 or 4 channels). Color background settings Click/tap [Select] for [Color Bkgd (ch)] to display the pop-up window. Select [1] or [2] for each system. Select both [1] and [2] to share on logical switchers 1 and 2. Note If logical switcher 1 or 2 is set to 4K format, a color background can be assigned to only one of the logical switchers. In addition, the color backgrounds that can be used on a 4K format logical switcher is restricted to one system only. Internal format converter settings (XVS-8000/ 7000/6000 only) Click/tap [Select] for [Internal FC (ch)] to display the pop-up window. Select [1] or [2] for the 16 channels. Select both [1] and [2] to share on logical switchers 1 and 2. Note When sharing is configured, you can use the FC channels for input use on logical switchers 1 and 2. FC channels for output use can be used on logical switcher 1 only. Multi viewer output settings (XVS-9000 only) Click/tap [Select] for [Multi Viewer Out (ch)] to display the pop-up window. Select [1] or [2] for each group of 8 outputs. Notes • The resource settings setup pop-up window is common to both multi viewer outputs and multi viewers. • If the logical switchers are set to a combination of 4K format and HD format, assign all multi viewer outputs to the same logical switcher. Multi viewer settings Click/tap [Select] for [Multi Viewer (ch)] to display the pop-up window. Select [1] or [2] for each system. To restore resource assignments to defaults Click/tap [Default Recall], check the message, then click/tap [Yes]. 5 Set the frame memory folder mode in [FM Folder Mode]. To set shared mode Select [Shared]. To set dedicated mode Select [Dedicated]. 6 Click/tap [Execute]. 7 Check the message, then click/tap [Yes]. Notes • The switcher system reboots when any of the following settings is changed. Resource sharing mode, logical switcher signal format, M/E assignment settings, DME assignment settings, frame memory folder mode • The XKS-8460 Format Converter Board reboots if an internal format converter assignment is changed. • The XKS-S8111 SDI Input and FC Connector Board and XKS-S8112/XKS-S9112 12G-SDI Input Boards reboot if an input assignment setting is changed. • The XKS-S9167 12G-SDI Output Board reboots if an output assignment setting is changed. • Reset the switcher after changing the input/output assignment settings of network connector boards. To display File Manager Click/tap [File]. File Manager is displayed in a separate window. To log out from Resource Share Setup Click/tap [Logout], check the message, then click/tap [Yes]. 529