Sony XVS-7000 Users Guide - Page 341
Shotbox Register Creation Menu, Creating a shotbox register, Registering key snapshots in a shotbox
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 341 highlights
To check the snapshot region: Press the [SNAPSHOT] button, turning it on. To check the effects region: Press the [EFF] button, turning it on. 3 Press and hold the [STORE] button. While the button is pressed, the button for the saved region lights amber. Shotbox Register Creation (Menu) Creating a shotbox register 1 Open the Shotbox >Register >Store/Recall menu (6411). The status area shows the following information for each register. Register: Displays the shotbox register number and name. Lock status: Displays "L" when the register is locked (write-protected). Register empty status: Displays "E" when the register is empty. Auto run setting: Displays "AR" when auto run is enabled. Region settings: Displays "Sxxx" if a snapshot is registered, and displays "Exxx" if an effect is registered (where xxx is the register number). Displays "KSS" when a key snapshot is registered. 2 Switch the region display as required. Press the button corresponding to the region you want to display. M/E: M/E-1 ("ME1"), M/E-2 ("ME2"), M/E-3 ("ME3"), M/E-4 ("ME4"), M/E-5 ("ME5") P/P: PGM/PST ("P/P") User: User1 ("USR1"), User2 ("USR2"), User3 ("USR3"), User4 ("USR4"), User5 ("USR5"), User6 ("USR6"), User7 ("USR7"), User8 ("USR8") DME: DME ch1 ("DME1"), ch2 ("DME2"), ch3 ("DME3"), ch4 ("DME4") DEV1-8: Device1 ("DEV1"), Device2 ("DEV2"), Device3 ("DEV3"), Device4 ("DEV4"), Device5 ("DEV5"), Device6 ("DEV6"), Device7 ("DEV7"), Device8 ("DEV8") DEV9-12: Device9 ("DEV9"), Device10 ("DEV10"), Device11 ("DEV11"), Device12 ("DEV12") Misc: P-Bus ("PBUS"), GPI ("GPI"), Router ("RTR"), Macro ("MCRO") 3 In the status area, select the target register to set. 4 Press [Edit]. The Edit menu (6411.1) appears. You can also select the register in this menu using the [Shotbox Reg] parameter. The status area shows the information for the selected shotbox register and the region selection buttons. 5 Press a region selection button to select a region. You can select more than one region. To select all regions, press [ALL]. To select all switcher-related regions (M/E, P/P, User), press [SWR ALL]. 6 In the group, select a snapshot or effect. Snapshot: Set a snapshot. Select the register to register using the following parameter. No. Parameter Adjustment 3 Snapshot Snapshot register number Effect: Set an effect. Select the register to register using the following parameter. No. Parameter Adjustment 3 Effect Effect register number The region selection button shows the selected register number. 7 Repeat steps 5 and 6 as required to set all snapshots/ effects to be registered in the shotbox register. 8 To enable auto run, press [Auto Run], turning it on. When auto run is enabled, the effects are executed at the same time the register is recalled. 9 In the group, press [Store]. To return to the state before saving the setting In the group, press [Undo]. Registering key snapshots in a shotbox register Note Only a snapshot/effect or a key snapshot can be set in an M/E region. 1 In the Shotbox >Register >Store/Recall menu (6411), select the target register to set. 2 Press [Key Snapshot Edit]. The Key Snapshot Edit menu (6411.2) appears. You can also select the register in this menu using the [Shotbox Reg] parameter. 341