Sony XVS-7000 Users Guide - Page 148
Applying modulation to a wipe pattern, Applying a spiral effect to a wipe pattern
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
No. Parameter Adjustment 1 Width Width 2 H Offset Spacing in the horizontal direction • Negative values move the even- numbered group to the left, and the odd-numbered group move to the right. • Positive values move the even- numbered group to the right, and the odd-numbered group move to the left. 3 V Offset Spacing in the vertical direction • Negative values move the even- numbered group up, and the odd- numbered group down. • Positive values move the even- numbered group down, and the odd-numbered group up. Applying modulation to a wipe pattern (Modulation) The pattern waveform signal can be modulated, creating ripples in the horizontal, vertical, or radial direction along the edges. H (horizontal modulation) This modulates the pattern in the horizontal direction. V (vertical modulation) This modulates the pattern in the vertical direction. Fringe (radial modulation) This modulates the pattern in the radial direction. No. Parameter Adjustment 1 Amplitude Amplitude of modulation 2 Frequency Frequency of modulation 3 Speed 4 Shape Speed of ripples • Negative values create waves in the down, left, and counterclockwise directions. • Positive values create waves in the up, right, and clockwise directions. Modulation waveform a) a) 1: sine wave, 2: triangular wave, 3: rectangular wave Applying barrel or pincushion distortion to the edge of a wipe pattern (Spring) As the transition progresses, the edge of the pattern is subjected to barrel or pincushion distortion. Spring disabled Spring enabled 1 Open the M/E-1 >Wipe >Main Modify menu (1155). 2 Press [Spring], turning it on. 3 Set the following parameter. No. Parameter Adjustment 1 Gain Size and direction of the warp • A value of -100 corresponds to maximum inward warpage. • A value of +100 corresponds to maximum outward warpage. Applying a spiral effect to a wipe pattern (Spiral) This transforms the pattern into a spiral pattern. 1 Open the M/E-1 >Wipe >Main Modify menu (1155). 2 In the group, select the modulation type. 3 Set the following parameters. Spiral disabled Spiral enabled 1 Open the M/E-1 >Wipe >Main Modify menu (1155). 148