Sony XVS-7000 Users Guide - Page 192
Status Menu
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
Note The enable/disable setting is applied to all link groups. 1 Open the Aux >Aux Bus >CCR menu (2311). 2 Press [Link Enable] to enable/disable link groups. To enable, press [Link Enable], turning it on. To disable, press [Link Enable], turning it off. To apply the same setting to color correctors in the group If the setting of color correctors in the group is different, select a specific AUX bus and press [Copy in Link]. The color corrector of all AUX buses in the group are set to the same setting as the selected AUX bus. Status Menu You can check the state of DME usage in the Status menu. Displaying DME usage status Open the Status >DME Status menu (3311). DME usage status display The usage status for each DME channel is displayed. You can check the following status according to the background color of the display. Blue: The DME is currently being used in other than the final program output. Red: The DME is currently being used in the final program output. 192