Sony XVS-7000 Users Guide - Page 258
Explosion Settings, Swirl Settings, Melt Settings, Applying the Explosion effect
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 258 highlights
Note If Sphere is used on one channel when the signal format is 1080P (for example, when the input is a title), parts of the rear surface other than the title appear as black. To set the explosion center point 1 Press [Position]. 2 Set the following parameters. Explosion Settings You can set the pattern shape and aspect ratio, the center position, the amount of movement by fragments, the curvature of the transition path, and other parameters. Applying the Explosion effect 1 In the group of the Non Linear >Explosion menu (4141.25), select the explosion shape. Circle: Circular shape Rectangle: Rectangular shape Star: Star shape Heart: Heart shape Ellipse: Elliptical shape 2 Set the following parameters, according to the selected shape. When [Circle] is selected No. Parameter Adjustment 1 Transition Degree of transition 2 Curve Degree of image periphery expansion 3 Spiral Degree of curvature of transition path When [Rectangle], [Star], [Heart], or [Ellipse] is selected No. Parameter Adjustment 1 Transition Degree of transition 2 Curve Degree of image periphery expansion 3 Aspect Aspect ratio of waveform 4 Angle Slant of waveform To turn the fragments into stardust 1 Press [Pixel], turning it on. 2 Set the following parameters. No. Parameter Adjustment 1 Density Degree to which image disappears 2 Random Degree of randomness in flying fragments No. Parameter Adjustment 1 H Center point in horizontal direction 2 V Center point in vertical direction Swirl Settings You can set the amount of swirl, the swirl region, the amount of rotation, and the swirl center position. Applying the Swirl effect In the Non Linear >Swirl menu (4141.26), set the following parameters. No. Parameter Adjustment 1 Transition Swirl amount 2 Center Amount of rotation in center of swirl 3 Outer Amount of rotation outside of Area 4 Area Region of swirl To turn the tip of the swirl into stardust 1 Press [Pixel], turning it on. 2 Set the following parameters. No. Parameter Adjustment 1 Density Degree to which image disappears 2 Random Trail type and amount of stardust To set the center position of the swirl 1 Press [Position]. 2 Set the following parameters. No. Parameter Adjustment 1 H Horizontal center position of swirl 2 V Vertical center position of swirl Melt Settings You can set the degree of transition, the degree of extension in the image, the jaggedness of the melting sections, the amplitude and frequency, amount of movement, the speed of the melting sections, the slant of 258