Sony XVS-7000 Users Guide - Page 28

To assign a bus/function to the 1st row to 4th row, use the delegation buttons on the cross-point pad. Notes • When a key bus is assigned and a cross-point button is pressed, a key fill signal is selected. While a key bus delegation button is pressed, you can select a key fill signal on the 1st row and a key source signal on the 2nd row, regardless of the button row to which the key bus is assigned. • When a DME video bus or DME key bus is assigned and a cross-point button is pressed, a front image signal is selected. When a cross-point button is pressed while pressing a DME video bus/DME key bus delegation button, a rear image signal is selected. • The operation of the [SHIFT] button is the operation mode set by the cross-point assign table of the switcher bank (M/E or P/P), regardless of the buses assigned to the cross-point button rows. Key/AUX bus delegation mode Setting key/AUX bus delegation mode in the Setup menu allows you to use the 1st row buttons as 2nd row delegation buttons. For details, see "Setting the Operation Mode of the CrossPoint Control Block Button Rows" (page 432). You can assign the following bus/function delegation buttons to the 1st row. KEY1 to KEY81), UTIL1, UTIL2, DME EXT, DME UTIL1, DME UTIL2, EDIT PVW, AUX1 to AUX48, FMS1, FMS2, DME1 V to DME4 V2), DME1 K to DME4 K2), UTIL/SBOX1 to UTIL/SBOX10 1) When a 2nd row button is pressed, a key fill signal is selected. When a 2nd row button is pressed while pressing a 1st row delegation button, a key source signal is selected. 2) When a 2nd row button is pressed, a front image signal is selected. When a 2nd row button is pressed while pressing a 1st row delegation button, a rear image signal is selected. Notes • In key/AUX bus delegation mode, the cross-point pad delegation buttons are not available. • The operation of the [SHIFT] button in the 2nd row is the operation mode set by the cross-point assign table of the switcher bank (M/E or P/P), regardless of the bus selected in the 1st row. 28