Sony XVS-7000 Users Guide - Page 40
Device Control Block Trackball, Independent key transition execution Mode selection buttons
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
For details about transition types, see "Transition Type" (page 84). e Independent key transition execution section This section executes independent key transitions. KEY ON buttons Fader lever Transition indicator AUTO TRANS buttons Name Fader lever Transition indicator KEY ON buttons AUTO TRANS (auto transition) buttons Description Move this up or down to carry out the transition. Displays the transition progress using LEDs. • Inserts or removes a key, for key delegation buttons 1 to 4, instantaneously. • If a key is currently inserted, the corresponding key button is lit amber. • Inserts or removes a key automatically, for key delegation buttons 1 to 4, with the set transition rate and transition type. • During the transition, the button is lit amber. You can also set the key delegation button for operation by the fader lever. For details, see "Setting the Buttons and Fader Levers on the Key Fader Control Block" (page 408). Device Control Block (Trackball) The device control block (trackball) is used for threedimensional transforms using a DME, two-dimensional transforms using a resizer, executing keyframe effects, controlling VTRs/disk recorders/frame memory clips, setting menu parameters, and so on. a Mode selection buttons b Channel selection buttons c Operation buttons d Display e Trackball f Z-ring a Mode selection buttons These buttons select the operation mode of the device control block (trackball). The function of the device control block (trackball) buttons, trackball, and Z-ring vary depending on the operation mode. You can change the assignment of mode selection buttons in the Setup menu. For details, see "Setting Device Control Block (Trackball) Button Assignments" (page 411). 40