Sony XVS-7000 Users Guide - Page 176
Clip Operations, Recalling Still Images, Creating a Clip Recording
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
6 In the group, select one of the following. Frame: Execute a frame freeze, saving a still image file in memory. Field: Execute a field freeze, saving a still image file in memory. To enable V/K mode Press [V/K Mode], turning it on. For details, see "V/K mode" (page 170). To save still image files in storage Select a file stored in memory in the folder/file selection area. A confirmation message appears. Select [Yes] to start saving the file in storage. Note A file within a locked folder cannot be saved in storage. Recalling Still Images Selecting a still image file in memory recalls the file on an FM output. 1 Open the Frame Memory >Clip/Still >Recall menu (2111). 2 Select the target FM output for operation in the FM output selection area. For details about the method of operation, see "Selecting an FM Output" (page 173). 3 Select the file to recall in the folder/file selection area. You can also enter the name of a folder/file to search for (see page 174). A light-blue frame is applied to the selected file, and the image is recalled on the target FM output. Clip Operations Creating a Clip (Recording) Assigning a frame memory source bus signal to an FM output and then executing recording captures a clip and saves it in memory. Notes • When the system is powered off, files and folders in memory are lost. Save any required files in storage. • When the available number that can be saved in each signal format equals the following values, the record operation cannot be executed. - 1080PsF, 1080i: "1" ("3" in pair mode) - 1080P, 720P: "3" ("7" in pair mode) - 3840×2160PsF: "7" ("15" in pair mode) - 3840×2160P: "15" ("31" in pair mode) 1 Open the Frame Memory >Clip/Still >Record menu (2113). 2 Select the target FM output for operation in the FM output selection area. For details about the method of operation, see "Selecting an FM Output" (page 173). 3 Press [Through], turning it on. The input image on the frame memory source bus is output on the target FM output. Note The output on the FM output is delayed by one frame. 4 Select the save destination folder in the folder/file selection area. To create a folder Press [New], and enter the folder name using the keyboard window. Note A folder cannot be created within a locked folder. 5 Set the name of the file to create. Press [Name], and enter the file name using the keyboard window. The specified file name is displayed in the status area in the center of the screen. 6 Press [Record Start] at the position you want to start recording. 176