Sony XVS-7000 Users Guide - Page 137
Key Freeze Setting, Circle, When [Angle] is selected
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 137 highlights
Circle: Use a circle pattern as the mask signal. 5 Set the following parameters. No. Parameter Adjustment 1 H Horizontal position 2 V Vertical position 3 Size Size of mask 4 Soft Softness of mask 5 Aspect Aspect ratio 6 To invert the mask source, press [Mask Invert], turning it on. 7 To rotate a pattern, select the type of rotation in the group, and set the following parameter. When [Angle] is selected No. Parameter 1 Angle Adjustment Rotation angle of pattern • A value of -1.00 corresponds to a rotation of one turn counterclockwise. • A value of +1.00 corresponds to a rotation of one turn clockwise. • A value of 0.00 corresponds to no rotation. When [Speed] is selected No. Parameter 1 Speed Adjustment Rotation speed of pattern • A value of -100.00 corresponds to 4 rpm counterclockwise rotation. • A value of +100.00 corresponds to 4 rpm clockwise rotation. • A value of 0.00 corresponds to pause. Notes • When a mask effect is applied to a border, the boundary becomes discontinuous, giving an unnatural effect. Avoid applying a mask to a border. • Enabling mosaic or defocus and selecting [Video/Key] in the group disables the mask. Key Freeze Setting You can enable a resizer and freeze the key image. Notes • This setting is available only when the switcher signal format is 3840×2160P. • When key freeze is set, the key cannot be adjusted. • When key freeze is set, the resizer cannot be operated (except for the resizer and key freeze enable/disable setting operation). • Even when key freeze is set, the following data is saved with the key freeze state released. - Key memory - Snapshots - Key snapshots - Initial status • When key freeze is set and any of the following operations is performed, the key freeze is released. - M/E copy (copy destination only)/swap - Keyer copy (copy destination only)/swap - Creating and editing keyframes • When key freeze is set and any of the following operations is performed, the initial key freeze setting cannot be restored, even if the undo function ([UNDO] button or [Undo] in the menu) is executed. If executed, the key freeze is released. - Recall snapshot - Recall key snapshot - M/E copy (copy destination only)/swap - Keyer copy (copy destination only)/swap • When key freeze is set, the key freeze setting is retained in the following cases, even when a keyframe, snapshot, or key snapshot is recalled. - When key disable is set (see page 468) - When key modifiers are disabled (see page 334) 1 In the M/E-1 >Key1 >Resizer menu (1115), press [Resizer], turning it on. 2 Press [Key Freeze], turning it on. Key freeze is set, and "Freeze" is displayed on the VF button of key 1 in the M/E-1 menu. To release the key freeze Press [Key Freeze], turning it off. 137