Sony XVS-7000 Users Guide - Page 271
Copying or swapping light source settings, Multiply, Flat Color, Hue Rotation
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 271 highlights
To rotate the ring 1 In the Light 1 menu (4156.3), press [Ring Speed], turning it on. When [Ring] is selected, the display of the 3rd parameter changes. 2 Set the following parameter. No. Parameter Adjustment 3 Speed Rotation speed and direction a) a) -100.00 is four rotations per second in the counterclockwise direction, and +100.00 is four rotations per second in the clockwise direction. 0.00 stops the rotation. To invert the illuminated area In the Light 1 menu (4156.3), press [Light Invert], turning it on. To add color to the light source 1 In the Light 1 menu (4156.3), press [Light Color Adjust]. The Light Color Adjust menu (4156.4) appears. 2 In the group, select how the light and image should be blended. Mix: Lighting as if reflected from a mirror. Multiply: Light as if reflected from a dull surface (diffuse reflection). 3 When [Mix] is selected, select the fill color in the group. Flat Color: A single color matte Hue Rotation: Color matte with a color that gradually varies 4 Set the following parameters, according to the fill color selection. When [Flat Color] is selected No. Parameter Adjustment 1 Luminance Luminance 2 Saturation Saturation 3 Hue Hue 4 Brilliancy Brilliance of surface struck by light a) When [Hue Rotation] is selected No. Parameter Adjustment 1 Luminance Luminance 2 Saturation Saturation No. Parameter Adjustment 3 Speed Speed at which the hue changes b) 4 Brilliancy Brilliance of surface struck by light a) a) At 100.00, the image beneath the light shines through. b) -12.00 is a 360° rotation every second in the counterclockwise direction. +12.00 is a 360° rotation every second in the clockwise direction. Copying or swapping light source settings You can copy or swap the setting from one light source (Light 1 to Light 3) to another light source. 1 In the Spot Lighting menu (4156), press [Copy/Swap]. The Copy/Swap menu (4156.2) appears. In the status area, two lists appear. The copy or swap sources are displayed on the left, and the copy or swap destinations are displayed on the right. 2 Select the target data. 3 Press [Copy] to copy, or [Swap] to swap. To undo a copy or swap Press [Undo] to return settings to their values before the copy or swap. 271