Sony XVS-7000 Users Guide - Page 262
Trail Settings, Selecting the signal for the afterimage
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 262 highlights
Trail Settings Note Enabling Trail automatically disables Motion Decay, Keyframe Strobe, or Wind if it is set. Applying the Trail effect 1 Open the DME >Light/Trail >Trail menu (4152). 2 Press [Trail], turning it on. 3 Set the following parameters. No. Parameter Adjustment 1 Decay Amount of afterimage displayed a) 2 Interval Freeze interval 3 Live Proportion of time between frozen images for inserting live video a) 0.00 represents no afterimage. 100.00 represents no decay in the afterimage. Selecting the priority between the current image and superimposed trail In the group of the DME >Light/Trail >Trail menu (4152), select the way in which the images are overlaid. Over: Input image is on top. Under: Afterimage trail is on top. Selecting the signal for the afterimage portion In the group of the DME >Light/Trail >Trail menu (4152), select the image to insert in the afterimage trail. Notes • Only [Mix Color] or [Ext Video] can be used between the Background (see page 272), Flex Shadow (see page 235), Trail, and Wind (see page 265) effects. If [Mix Color] or [Ext Video] is selected for one of these effects, the [Mix Color] or [Ext Video] for the other effects is disabled, and [Flat Color] is selected in its place. • When executing a 4-channel combination, [Mix Color] and [Ext Video] cannot be selected. Freeze Video: Freeze the input image to use as the afterimage. Flat Color: Uses a single color matte as the afterimage. You can set the following parameters. No. Parameter Adjustment 1 Luminance Luminance 2 Saturation Saturation 3 Hue Hue Hue Rotate: Use a color matte whose hue varies slightly with each frame for the trail of the afterimages. You can set the following parameters. No. Parameter Adjustment 1 Luminance Luminance 2 Saturation Saturation 3 Hue Speed Speed at which the hue changes Mix Color: Insert a mix color signal (see page 240) in the afterimage portion. Ext Video: Insert an external video signal input from Ext In in the afterimage portion. Rainbow: Use a freeze image with the hue changing every frame in the afterimage portion. The difference from [Hue Rotate] is that many colors appear simultaneously. You can set the following parameters. No. Parameter Adjustment 1 Luminance Luminance 2 Saturation Saturation 3 Hue Speed Speed at which the hue changes Erasing the afterimages that remain in memory whenever a keyframe is passed In the DME >Light/Trail >Trail menu (4152), press [Trail Eraser], turning it on. When the effect passes a keyframe, the afterimage is erased before writing a new afterimage. Selecting the freeze timing In the group of the DME >Light/ Trail >Trail menu (4152), select the timing for freezing a trail. Frame: Freeze in frame units. Field: Freeze in field units. Note When the signal format is 3840×2160P 2SI, 1080P, 1080PsF, or 720P, the freeze timing cannot be specified. Defocusing the afterimage portion (Defocus) 1 In the DME >Light/Trail >Trail menu (4152), press [Defocus], turning it on. 2 Set the following parameters. 262