Sony XVS-7000 Users Guide - Page 235
Flex Shadow Settings, Setting art edge colors, Rounding art edge corners
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 235 highlights
Setting art edge colors 1 In the group of the Art Edge menu (4114), select the color (Color 1 to Color 3) to set. 2 Set the following parameters. When Color 1 is selected No. Parameter Adjustment 1 Luminance Luminance 2 Saturation Saturation 3 Hue Hue When Color 2 is selected No. Parameter Adjustment 1 Luminance Luminance 2 Saturation Saturation 3 Hue Offset Hue range Note Color 2 cannot be set when [Flat Color] is selected in the group. When Color 3 is selected No. Parameter Adjustment 1 Luminance Luminance 2 Saturation Saturation 3 Hue Offset Hue range Note Enabled only when [Rainbow Gradation] is selected in the group. Relationship between Hue and Hue Offset For example, when the Hue value of Color 1 is 180.00 and the Hue Offset value of Color 2 is -540.00, the hue changes within the Hue Offset range of Color 1 and Color 2 as shown below. Rounding art edge corners In the Art Edge menu (4114), press [Round Corner], turning it on. The art edge corners on the inner and outer sides are rounded. Note This function is only enabled when [Soft] is selected. Flex Shadow Settings Notes • When the signal format is 3840×2160P 2SI or 1080P, the following flex shadow functions cannot be used. - [External] in the group - [Ext Video] in the group • [Mix Color] or [Ext Video] can only be applied to one of the background (see page 272), flex shadow, trail (see page 262), and wind (see page 265) effects. If [Mix Color] or [Ext Video] is selected for one of these effects, the [Mix Color] or [Ext Video] for the other effects is disabled, and [Flat Color] is selected in its place. • When executing a 4-channel combination, the [Mix Color] and [Ext Video] for flex shadow and background effects cannot be selected. Applying a flex shadow effect 1 Open the DME >Edge >Flex Shadow menu (4115). 2 Press [Flex Shadow], turning it on. Note The flex shadow function cannot be enabled when the following functions are enabled. • All nonlinear effects • Brick and shadow global effects 3 Set the following parameters. Hue Offset setting range Hue setting range No. Parameter Adjustment 1 H Move shadow horizontally 2 V Move shadow vertically 3 Size All Enlarge or shrink horizontally and vertically 4 Soft a) Softness of shadow 5 Density Density of shadow a) The Soft parameter is valid only when [Internal] is selected in the group. 235