Sony XVS-7000 Users Guide - Page 274
Corner Pinning Settings, Setting the foreground corner
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 274 highlights
Field: Do interpolation in field units. This gives natural movement, suitable for movies. Frame: Do interpolation in frame units. This gives higher image precision, suitable for still pictures. 5 When [Adaptive] is selected in step 4, set the following parameter. Active marker Other markers No. Parameter Adjustment 1 Mode Degree of change detection 6 In the group, set the number of pixels to use in interpolation. Multi: Use multi-point interpolation. This gives higher picture quality. Linear: Use two-point interpolation. 7 In the group, select the method used to control picture reduction or expansion. Mode1: Even when the picture is reduced, add compensation so that it can be seen clearly (standard). Mode2: Suppress aliasing when expanding or reducing the picture (soft). Mode3: Do not suppress aliasing when expanding or reducing the picture (sharp). Corner Pinning Settings Note When the Brick function is enabled, Corner Pinning cannot be used. 4 In the group, select the target corner to set. Top Left: Top left corner Top Right: Top right corner Bottom Left: Bottom left corner Bottom Right: Bottom right corner All: All four corners 5 Set the position of the corner selected in step 4. No. Parameter Adjustment 1 Pos X Movement in X-axis direction 2 Pos Y Movement in Y-axis direction To reset the corner positions In the Corner Pinning menu (4142), press [Reset Corner]. To select the target area of the foreground When the foreground is cropped, select the target range. In the Corner Pinning menu (4142), press [Crop Link], turning it on, to set the cropped image as the target range. When [Crop Link] is disabled, the whole picture, including the invisible cropped portions (gray portions in the following diagram), become the target range. Setting the foreground corner 1 Open the DME >Non Linear/Corner Pin >Corner Pinning menu (4142). 2 Press [Corner Pinning], turning it on. 3 Press [Corner Marker], turning it on. A marker appears for each corner. The marker for the selected corner is distinguished from the other markers. Target range with Crop Link enabled Target range with Crop Link disabled ( indicates the target range) 274