Sony XVS-7000 Users Guide - Page 87
Setting the Key Priority Transition, Control Block, Key Priority Setting Operations
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Setting the Key Priority (Transition Control Block) Next transition selection buttons PRIOR SET button KEY PRIOR button Transition control block Note Setting the key priority is not supported using the transition control block (simple type). Changing the key priority Key priority: 3, 1, 4, 2 Select [KEY1]. Key priority: 1, 3, 4, 2 1 Press and hold the [PRIOR SET] and press the [KEY PRIOR] button to select key priority setting mode. When the [KEY PRIOR] button is lit green, key setting mode for after the transition is selected. When the [KEY PRIOR] button is not lit, key setting mode for the currently inserted keys is selected. 2 Set the key to display at the front. Set each group, consisting of key 1 to key 4 and key 5 to key 8. Press and hold the [PRIOR SET] button and press the [KEY1] to [KEY4] buttons or [KEY5] to [KEY8] buttons. The selected key is set for display at the front within the group. To set the key priority for after the transition to the same setting as the current setting, press and hold the [PRIOR SET] button and press the [BKGD] button. Notes • You can set the key priority within the key 1 to key 4 group and key 5 to key 8 group, but not for combinations of keys from different groups. For example, it is not possible to set a sequence of keys 1, 5, and 2. • The [BKGD] button is active only when in the mode for changing the key priority for after the transition. The current key priority can be checked on the program monitor for the switcher bank. When the [KEY PRIOR] button is selected in a next transition, the key priority for after the transition can be checked on the preview monitor for the switcher bank. 3 Repeat steps 1 and 2 to set the key priority. Key Priority Setting Operations (Menu) The priority of the key 1 to key 4 group and key 5 to key 8 group (higher/lower) sets the key sequence within each group. The keys in the higher group have priority 1 to 4, and the keys in the lower group have priority 5 to 8. This section describes setting the key priority on the M/E-1 bank as an example. Changing the key priority 1 Display the key priority setting menu. To set the key priority of the currently inserted keys, open the M/E-1 >Misc >Key Priority menu (1173). 87