Sony XVS-7000 Users Guide - Page 265
Wind Settings, Disabling the afterimage trail, Setting a combine process, Applying the Wind effect
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 265 highlights
No. Parameter Adjustment 4 Dust Aspect Aspect ratio of stardust a) The way in which the afterimage disappears is affected by both the keyframe strobe [Decay] and [KF Strobe Dust] parameter adjustments. Disabling the afterimage trail In the DME >Light/Trail >KF Strobe menu (4154), press [KF Strobe Disable], turning it on. If this function is enabled when creating a keyframe, even as the effect passes a keyframe, no afterimage remains. Setting a combine process Select whether to add the Keyframe Strobe effect before or after the combine. Notes • When you change the selection in the group, the afterimages which had been added up to then disappear. • When you do not combine images, the Keyframe Strobe effect only is applied, regardless of the selection in the group. In the group of the DME >Light/Trail >KF Strobe menu (4154), select one of the following. Combine −> KF STRB: Add the Keyframe Strobe effect after the combine. The parameter data for the channel with the lowest number among the channels being combined is enabled. KF STRB −> Combine: Add the Keyframe Strobe effect before the combine. Parameters can be set independently for each channel. Wind Settings Notes • Enabling Wind automatically disables Trail, Motion Decay, or Keyframe Strobe if it is set. • There are differences in the Wind effect between the XKS-8470 and XKS-8475. Applying the Wind effect 1 Open the DME >Light/Trail >Wind menu (4155). 2 Press [Wind], turning it on. 3 Set the following parameters. No. Parameter Adjustment 1 Decay Amount of afterimage displayed a) 2 Shift H Extension in the horizontal direction 3 Shift V Extension in the vertical direction a) 0.00 represents no afterimage. 100.00 represents no decay in the afterimage. Selecting the signal for the afterimage portion In the group of the DME >Light/Trail >Wind menu (4155), select the image to insert in the afterimage trail. Notes • Only [Mix Color] or [Ext Video] can be used between the Background (see page 272), Flex Shadow (see page 235), Trail (see page 262), and Wind effects. If [Mix Color] or [Ext Video] is selected for one of these effects, the [Mix Color] or [Ext Video] for the other effects is disabled, and [Flat Color] is selected in its place. • When executing a 4-channel combination, [Mix Color] and [Ext Video] cannot be selected. Freeze Video: Freeze the input image to use as the afterimage. Flat Color: Uses a single color matte as the afterimage. You can set the following parameters. No. Parameter Adjustment 1 Luminance Luminance 2 Saturation Saturation 3 Hue Hue Hue Rotate: Use a color matte whose hue varies slightly with each frame for the trail of the afterimages. You can set the following parameters. No. Parameter Adjustment 1 Luminance Luminance 2 Saturation Saturation 3 Hue Speed Speed at which the hue changes Mix Color: Insert a mix color signal (see page 240) in the afterimage portion. Ext Video: Insert an external video signal input from Ext In in the afterimage portion. Rainbow: Use a freeze image with the hue changing every frame in the afterimage portion. The difference from [Hue Rotate] is that many colors appear simultaneously. You can set the following parameters. 265