Sony XVS-7000 Users Guide - Page 86

1 Select the background video on the cross-point control block. Select the video to display before execution of the transition using the background A bus cross-point buttons, and the video to display after the transition using the background B bus cross-point buttons. 2 Select the transition type using the transition type selection buttons. For details, refer to step 5 in "Operations on the transition control block" (page 84). 3 Make the required settings, according to the selected transition type. For details, refer to step 6 in "Operations on the transition control block" (page 84). 4 Carry out the transition in the transition execution section. Press the [TAKE] button or operate the fader lever. Pressing the [TAKE] button executes the transition at the preset transition rate. For details, see "Executing a Transition" (page 91). Key Priority Settings If a number of keys are already inserted in the current video, you can check or change the overlay sequence (key priority). When a key priority ([KEY PRIOR] button) is selected as the next transition, you can also change the key priority when switching to the new video. The key priority values are from 1 to 4, with a higher priority key being "in front" as seen on the screen. Priority 2 Priority 1 Note You can also use the fader lever as split faders (see page 97). Priority 4 Priority 3 You can set the key priority for keys inserted in the current video and for keys after the transition. The key priority setting can be set using either the [PRIOR SET] button in the transition control block, or using the Misc >Key Priority menu for the M/E or PGM/PST bank. Note When the operating mode is set to multi program, the key priority setting cannot be made. 86