Sony XVS-7000 Users Guide - Page 294

Selecting a folder A target folder must be selected for the AMP protocol. 1 In the Device >DDR/VTR >File List menu (5333), press [Folder List]. The Folder List menu (5334) appears. The upper part of the status area shows the device number selected as the target and the name of the selected folder. The lower part of the status area shows a list of selectable folders. 2 Select a device. No. Parameter Adjustment 1 DEV Device number 3 Press [Folder List Update] to update the folder list. To sort the folders in the list In the group, select the sorting method. Folder No: Sort by folder number (low t high order) Folder Name: Sort by folder name (ASCII code order) 4 Select a folder. 5 Press [Set]. The selected folder is loaded as the target. 1 Open the Device >DDR/VTR >File List menu (5333). 2 Select a device. 3 Press [New File]. 4 Enter the file name using the keyboard window, and press [Enter]. You can enter up to 8 characters (in Fixed 8 Character mode) or 23 characters (in Variable Length mode). For details about character entry modes, see "Configuring detailed settings for a disk recorder (video disk communications protocol)" (page 480). To release the selected recording file Press [Unload]. Loading files You can select and load a file for playback. Note If the type of disk recorder (video disk communications protocol) is set to "Recorder," a file cannot be loaded. 1 Open the Device >DDR/VTR >File List menu (5333). 2 Select a device. 3 Select the target file in the file list. 4 Press [Load]. Creating new files A new file must be created to record on a disk recorder (video disk communications protocol). Notes • If the type of disk recorder (video disk communications protocol) is set to "Player," a file cannot be created. • A file cannot be created for the Odetics protocol, AMP protocol, or Extended VTR. 294