Sony XVS-7000 Users Guide - Page 147

1 Open the M/E-1 >Wipe >Main Modify menu (1155). 2 Press [Aspect], turning it on. 3 Set the following parameter. No. Parameter Adjustment 1 Aspect Aspect ratio • Negative values expand vertically. • Positive values expand horizontally. Replicating a wipe pattern (Multi) The same pattern can be repeated horizontally and vertically or both, up to 63 times. You can also change the orientation of alternate patterns, or change the position. Multi disabled Multi enabled For an independent key transition wipe, you can use the [Invert Type] parameter to select from the following types of replication pattern. 1: All patterns in the same orientation 2: Even-numbered rows moved horizontally 3: Even-numbered columns inverted horizontally, even- numbered rows inverted vertically 4: Even-numbered columns inverted horizontally, even- numbered rows inverted vertically and moved horizontally 1 Open the M/E-1 >Wipe >Main Modify menu (1155). 2 Press [Multi], turning it on. 3 Set the following parameters. No. Parameter Adjustment 1 H Multi Number of repetitions of pattern horizontally No. Parameter Adjustment 2 V Multi Number of repetitions of pattern vertically 3 Shift Pattern layout • Negative values move even- numbered columns to the left. • Positive values move even- numbered columns to the right. 4 Press [Multi Adjust]. The Multi Adjust menu (1155.1) appears. 5 Make the following settings as required. H Invert: Inverts the horizontal orientation of patterns alternately. V Invert: Inverts the vertical orientation of patterns alternately. Non-Mask: Ensure the pattern is always visible on the screen, even when the positioner function (see page 145) is used to move the pattern position. Position: Moves the pattern position within the regions set in step 3 by adjusting the following parameters. No. Parameter Adjustment 1 Position H Horizontal position • Negative values move right. • Positive values move left. 2 Position V Vertical position • Negative values move down. • Positive values move up. Making a wipe pattern like a Venetian blind (Pairing) This slits the pattern into multiple strips in the horizontal or vertical direction, similar to a venetian blind. Pairing disabled Pairing enabled 1 Open the M/E-1 >Wipe >Main Modify menu (1155). 2 In the group, select the slit direction. H: Create slits in the horizontal direction. V: Create slits in the vertical direction. 3 Set the following parameters. 147