Sony XVS-7000 Users Guide - Page 326

COM0, COM1, COM2, COM3, COM4, COM5, COM6, COM7, COM8, COM9 LPT0, LPT1, LPT2, LPT3, LPT4, LPT5, LPT6, LPT7, LPT8, LPT9 Effect Register List View and Editing You can display a list of effect registers including status information (whether data is present and so on), then carry out lock, copy, delete, and rename operations. Displaying the list of effect registers Press the menu title button at the top left of the Effect menu. The Effect >Status menu (6200) appears. The status area shows a list of effect registers (1 to 99). Register name displays For the same number, the register name for the M/E-1 region takes precedence. If there is no data for the M/E-1 region, then the register name appears in the sequence M/E-2 >M/E-3 >M/E-4 >M/E-5 >PGM/PST >User1 to User8 >DME ch1 to DME ch4 >Device1 to Device12 >P-Bus >GPI >Macro. Indication colors Each register has a color-coded border, indicating its status. Selected register: Pale blue border Register containing data: Shown orange within the border. If, however, there are one or more locked regions, the display is in red. 3 Select the copy destination register. 4 In the group, press [To __]. Deleting data from effect registers This applies to all regions. 1 In the Effect >Status menu (6200), select the register. 2 Press [Delete]. Renaming an effect register This applies to all regions. 1 In the Effect >Status menu (6200), select the register. 2 Press [Rename]. 3 Enter a name of up to 8 characters in the keyboard window, and press [Enter]. Note The following names cannot be used. CON, PRN, AUX, CLOCK$, NUL COM0, COM1, COM2, COM3, COM4, COM5, COM6, COM7, COM8, COM9 LPT0, LPT1, LPT2, LPT3, LPT4, LPT5, LPT6, LPT7, LPT8, LPT9 Write-protecting the contents of the effect register This applies to all regions. 1 In the Effect >Status menu (6200), select the register. 2 Press [Lock]. The register is locked, and the background of the register indication appears in red. To release the lock Press [Lock] once more, turning the contents of the frame to orange. Copying data in effect registers This applies to all regions. 1 In the Effect >Status menu (6200), select the copy source register. 2 In the group, press [From __]. 326