Sony XVS-7000 Users Guide - Page 440
Assigning the output of each bank in, multi-program mode, Setting the output configuration for each
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 440 highlights
- Out2: Program output 2 - Out3: Key preview output 1 - Out4: Key preview output 2 Assigning the output of each bank in multi-program mode This configures Out2 to Out6 settings when [Multi Program] is selected as the operation mode (Out1 is fixed to PGM1). 1 In the Engineering Setup >Switcher >Config menu (7331), press [M/E Output Assign]. The M/E Output Assign menu (7331.1) appears. 2 In the status area list, select the target switcher bank output to set. 3 In the group, select the output signal to assign. Setting the output configuration for each bank This configures settings when [Multi Program] or [DSK] is selected as the operation mode. 1 In the Engineering Setup >Switcher >Config menu (7331), press [PGM Config]. The PGM Config menu (7331.2) appears. The status area shows the background and key configuration assigned to the output of each bank. 2 Select the target output to set. 3 In the group, select the background. In multi-program mode: Select [Clean] or [Utility2]. In DSK mode: Select one of [Bkgd1] to [Bkgd4], and set the background signal. No. Parameter Adjustment 2 to 5 Bkgd1 to 4 Background signal selection a) a) 1 to 6: M/E-1 Out1 to 6 7 to 12: M/E-2 Out1 to 6 13 to 18: M/E-3 Out1 to 6 19 to 24: M/E-4 Out1 to 6 25 to 30: M/E-5 Out1 to 6 Notes • In 4K format multi-program mode, [Clean] (fixed) is configured. • In 4K format DSK mode, [Bkgd3] cannot be selected. 4 In the group, select the key to enable. Note In 3840×2160P format multi-program mode and DSK mode, key 3 and key 4 have the same settings. Setting the key preview configuration 1 In the Engineering Setup >Switcher >Config menu (7331), press [K-PVW Config]. The K-PVW Config menu (7331.3) appears. The status area shows the key preview configuration for each bank. 2 Select the target key preview to set. 3 In the group, select the mode (Video or Key). If [Key] is selected, skip to step 5. 4 In the group, select the background. In multi-program mode: Select [Clean] or [Utility2]. In DSK mode: Select one of [Bkgd1] to [Bkgd4], and set the background signal. No. Parameter Adjustment 2 to 5 Bkgd1 to 4 Background signal selection a) a) 1 to 6: M/E-1 Out1 to 6 7 to 12: M/E-2 Out1 to 6 13 to 18: M/E-3 Out1 to 6 19 to 24: M/E-4 Out1 to 6 25 to 30: M/E-5 Out1 to 6 Notes • In standard mode, [Clean] is selected (fixed). • In 4K format multi-program mode, [Clean] (fixed) is configured. • In 4K format DSK mode, [Bkgd3] cannot be selected. 5 To set key 1 to key 4, press [Key1-Key4]. To set key 5 to key 8, press [Key5-Key8]. 6 In the to groups or to groups, select the key state. Link: Follows the key on/off state. On: Key is always on. Off: Key is always off. Note In 3840×2160P format, sub key mode must be set in the Setup menu in order to use key 3 for key preview. Key 4 cannot be used for key preview. For details, see "Setting the Sub Key Mode" (page 442). 440