Sony XVS-7000 Users Guide - Page 150

Basic Independent Key Transition Wipe Setting Operations You configure independent key transition wipe settings using the Wipe Adjust menu for each keyer. For details about independent key transitions, see "Independent Key Transitions" (page 99). This section describes operations of key 1 on the M/E-1 bank (M/E-1 >Key1 >Transition/Video Process >Wipe Adjust menu) as an example. Selecting an Independent Key Transition Wipe Pattern Note In an independent key transition, you can only use the standard wipe patterns (pattern numbers 1 to 24). 1 In the M/E-1 >Key1 >Transition/Video Process menu (1117), press [Wipe Adjust]. The Wipe Adjust menu (1117.1) appears. 2 Press [Pattern Select]. The Pattern Select menu (1117.2) appears. 3 Press the desired pattern to select it. Setting Independent Key Transition Wipe Modifiers You can use the following modifiers in an independent key transition wipe. However, the available modifiers may depend on the pattern you are using. • Direction • Soft edge • Positioner • Rotation • Aspect • Multi Setting the wipe direction (Direction) In the group of the M/E-1 >Key1 >Transition/ Video Process >Wipe Adjust menu (1117.1), select one of the following. Normal: Wipe in normal direction. Normal/Reverse: Wipe in the normal and reverse direction alternately for each transition. Reverse: Wipe in the opposite direction to normal. Softening the wipe pattern edge (Soft edge) 1 In the M/E-1 >Key1 >Transition/Video Process >Wipe Adjust menu (1117.1), press [Soft], turning it on. 2 Set the following parameter. No. Parameter Adjustment 1 Soft Edge softness Setting the wipe pattern position (Positioner) 1 In the M/E-1 >Key1 >Transition/Video Process >Wipe Adjust menu (1117.1), press [Position], turning it on. 2 Set the following parameters. No. Parameter Adjustment 1 Position H Horizontal position a) 2 Position V Vertical position a) a) See page 145. To move the pattern from its current position (set by Positioner) to the center of the screen during the course of a transition Press the [Auto Center] button, turning it on. Rotating the wipe pattern (Rotation) 1 In the group of the M/E-1 >Key1 >Transition/Video Process >Wipe Adjust menu (1117.1), select the rotation type. Angle: Incline the pattern at a fixed angle. Speed: Rotate the pattern at a set speed. Magnitude: Rotate the pattern through a fixed angle during the course of the transition. 2 Depending on the selection in step 1, set the following parameters. 150