Sony XVS-7000 Users Guide - Page 173

File existing in memory only: A "?" mark is displayed on the icon. Selecting an Input Image You can use the signal selected on the frame memory 1 bus or 2 bus for the input image to frame memory. Select the signal using the following procedure. Selecting frame memory source bus signal This section describes selecting the signal on the frame memory source 1 bus as an example. 1 On the AUX bus control block (AUX bus operation mode), press the [FMS 1] button on the 1st row (or 2nd row) to assign the frame memory source 1 bus to the cross-point button row. Notes • You can assign a frame memory source bus delegation button to the cross-point pad of the crosspoint control block in free assign mode in the Setup menu (see page 433). • You can assign a frame memory source bus delegation button to the 1st row of the cross-point control block in key/AUX bus delegation mode in the Setup menu (see page 432). 2 Select the signal to be used for the input image using the cross-point buttons. To select a signal with a key or DME effect applied on the frame memory source bus (frame memory feed) Press the [FM FEED] button (see page 128) in the key control block or press [FM Feed] in the Processed Key menu (see page 123). This automatically assigns the key fill and key source signals being keyed by the currently selected keyer to the frame memory source 1 bus and 2 bus. When DME is selected on the keyer, the key fill and key source signals with DME effect applied are assigned. Note In 4K format, the frame memory feed function cannot be used. Selecting an FM Output This section describes the display and selection of the FM1 and FM2 pair as an example. Selecting the target FM output for operation 1 In the FM output selection area of the Frame Memory >Clip/Still menu, press [Out Select]. 2 Select the FM1 and FM2 pair in the pop-up window. FM1 and FM2 appear on the FM output buttons. 3 Press [Pair] to set pair mode or single mode. Pair mode is selected when [Pair] is lit, and single mode is selected when it is not lit. For details, see "Pair mode and single mode" (page 170). 4 Press an FM output button to select the target FM output (FM1 or FM2). In pair mode, the selected FM output becomes the reference, and both FM1 and FM2 are selected. Locking FM outputs You can lock an FM output when a still image file or clip file is recalled on the FM output. The following operations are inhibited on a locked FM output. • Recalling a file • Creating a file (freeze, record) • Enabling/disabling audio data • Trimming a clip file • Editing a folder/file (supported if selected as the copy source) • Deleting a file/folder from memory Notes • Each FM output can be locked in single mode, and each pair of FM outputs can be locked in pair mode. • On each locked FM output, the image does not change even if a frame memory recall is executed by a snapshot, keyframe, or macro. Playback operations of clip files using a snapshot or keyframe are also inhibited. 1 Open the Frame Memory >Clip/Still >FM Out Lock menu (2114). 2 Select the target FM output for operation. Only FM outputs with a recalled still image file or clip file can be selected. A white frame is displayed for the selected FM output. 3 Press [Lock], turning it on. The FM output is locked, and "L" is displayed in the duration indicator area. 173