Sony XVS-7000 Users Guide - Page 278
Brick Settings, Crossing images from up to four
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 278 highlights
No. Parameter Adjustment 1 Mix1 Degree of mixing of channels 1 and 2 a) a) See page 276. 3 Press [Combiner2 Mix], turning it on. 4 Set the following parameter. No. Parameter Adjustment 1 Mix2 Degree of mixing of channels 3 and 4 a) a) See page 276. Automatically setting the priority of overlapping images In the Global Effect >Ch1-Ch4 >Combiner Priority menu (4211), press [Auto] (or [Combiner1 Auto] or [Combiner2 Auto]), turning it on, to set the priority of overlapping images so that they are automatically determined by their position on the Z-axis. Note It is not possible to cross images. If an image is rotated, the priority is determined by the position on the Z-axis of the center of the image. Crossing images from up to four consecutive channels in three dimensions 1 In the Global Effect >Ch1-Ch4 >Combiner Priority menu (4211), press [Depth], turning it on. 2 Set the following parameters. For "Ch1+Ch2" No. Parameter Adjustment 1 Soft Softness of edges of crossed section For "Ch1+Ch2+Ch3" No. Parameter Adjustment 1 Soft1 Softness of edges of channel 1 and channel 2 crossed section 2 Soft2 Softness of edges of channel 2 and channel 3 crossed section For "Ch1+Ch2+Ch3+Ch4" No. Parameter Adjustment 1 Soft1 Softness of edges of channel 1 and channel 2 crossed section 2 Soft2 Softness of edges of channel 2 and channel 3 crossed section 3 Soft3 Softness of edges of channel 3 and channel 4 crossed section Crossing images from channels 1 and 2, and channels 3 and 4 separately in three dimensions 1 In the Global Effect >Ch1-Ch4 >Combiner Priority menu (4211), press [Combiner1 Depth], turning it on. 2 Set the following parameter. No. Parameter Adjustment 1 Soft1 Softness of edges of channel 1 and channel 2 crossed section 3 Press [Combiner2 Depth], turning it on. 4 Set the following parameter. No. Parameter Adjustment 1 Soft2 Softness of edges of channel 3 and channel 4 crossed section Brick Settings Brick allows you to create a cuboid by using images of three consecutive channels (Ch). The Brick effect can combine Ch1, Ch2, and Ch3, or combine Ch2, Ch3, and Ch4. The images are displayed on the three surfaces as shown in the following figure. Combinations of Ch1, Ch2, and Ch3 Upper side: Ch1 image Side V: Ch2 image Side H: Ch3 image 278