Sony XVS-7000 Users Guide - Page 152

The button color varies as follows, according to the register state. Gray characters on black: Register not containing a saved snapshot White icon/characters on dark blue: Register containing a saved snapshot Lit orange: Last recalled register Note When both the main pattern and sub pattern are selected for a pattern mix, the main pattern image is displayed. Selecting a wipe pattern 1 In the M/E-1 bank Flexi Pad control block, press the [WIPE] button. This switches the memory recall section to wipe snapshot operation mode. 2 Press the [PTN NO.] button in the memory recall section. 3 Use the numeric keypad to enter the pattern number consisting of up to three digits, and press the [ENTER] button. The entry is applied, and the memory recall section switches back to wipe snapshot operation mode. The selected wipe pattern number is displayed on the top right button in the memory recall section. Saving a wipe snapshot 1 Configure the wipe you want to save. 2 In the Flexi Pad control block, press and hold the [KEY] button, and press the button for the register you want to save. The selected button is lit orange, and the set wipe pattern image is displayed. The set wipe pattern number is displayed on the top right button in the memory recall section. This switches the memory recall section to wipe snapshot operation mode. 2 Press the register button for register with the wipe snapshot you want to recall. The selected button is lit orange, and the wipe snapshot is recalled. The set wipe pattern number is displayed on the top right button in the memory recall section. To cancel a wipe snapshot recall operation To cancel the wipe snapshot recall, press the [UNDO] button. Deleting a wipe snapshot 1 In the Flexi Pad control block, press the [WIPE] button. This switches the memory recall section to wipe snapshot operation mode. 2 Press and hold the [DEL] button, and press the button of the register in which the wipe snapshot you want to delete is saved. The selected button changes to register number display. Wipe Snapshot Operations (Menu) Use the Wipe >Wipe Snapshot menu in each switcher bank. This section describes operations on the M/E-1 bank (M/E-1 >Wipe >Wipe Snapshot menu) as an example. Note If you press a button in which a wipe snapshot is already saved, the existing contents of the register will be overwritten. Recalling a wipe snapshot 1 In the Flexi Pad control block, press the [WIPE] button. Memory recall buttons Button displays You press buttons in the memory recall section to select registers (1 to 10). 152