Sony XVS-7000 Users Guide - Page 42

Button name Description CTR (center) • When the [CTR] is pressed once: Adjusts the two-dimensional transform setting values to the closest detent positions. • When the [CTR] button is pressed twice, or is pressed once while pressing the [SHIFT] button: Returns the two-dimensional transform setting values to the defaults. • When the [BDR/CROP] button is lit green, the [CTR] button selects the edge (bottom edge) to crop. X, Y, Z • Restricts the parameters targeted by the operation. When the [X] button is lit: Operations on parameters on the X-axis using the trackball are enabled. When the [Y] button is lit: Operations on parameters on the X-axis using the trackball are enabled. When the [Z] button is lit: Operations on parameters on the Z-axis (Z-ring adjustment items) using the Z-ring are enabled. • When the [ROT] button is lit, the [X] button and [Y] button select the direction of rotation. • When the [BDR/CROP] button is lit green, the [X] button, [Y] button, and [Z] button select the edge (top edge, left edge, right edge) to crop. • Setting values for parameters of buttons that are lit green can be entered using the numeric keypad control block. M/E DEF RCALL (M/E default recall) Press the [M/E DEF RCALL] button twice to return the currently selected bank (M/E or PGM/PST) to the defaults. Three-dimensional transform operation mode This mode performs three-dimensional transform operations on images using a DME. For details, see "Three-Dimensional Transform Operations" (page 224). Menu parameter operation mode This mode is used to set menu parameters. Button name FINE Description Switches to fine mode, enabling fine adjustment control of setting values using the trackball and Zring. Button name X, Y, Z Description • Restricts the parameters targeted by the operation. When the [X] button is lit: Operation on parameter 1 using the trackball is enabled. When the [Y] button is lit: Operation on parameter 2 using the trackball is enabled. When the [Z] button is lit: Operation on parameter 3 using the Z-ring is enabled. • Setting values for parameters of buttons that are lit green can be entered using the numeric keypad control block. VTR/disk recorder/frame memory operation mode This mode controls playback of VTRs/disk recorders and frame memory clips. For details, see "Control of VTRs and Disk Recorders" (page 286). d Display The information displayed will vary depending on the operation mode. Resizer operation mode • Reference bank name: M/E1 to M/E5, P/P • Reference channel name: KEY1 RSZR to KEY8 RSZR • Selected parameter item name: ASP, LOC SIZE, ROT PERS, BDR, CROP • X-, Y-, and Z-axes setting values Three-dimensional transform operation mode • Reference channel name: DME1 to DME4 • Currently selected three-dimensional space: LOCAL/ GLB and SRC/TRGT • Currently selected parameter item: LOC XYZ, ASP PERS, LOC SIZE, ROT, AXIS LOC, SPIN, SKEW • X-, Y-, and Z-axes setting values Menu parameter operation mode "MENU" is displayed. Keyframe operation mode • Reference region name, register number, and register name • Effect duration • Current keyframe number, total number of keyframes, and current timecode VTR/disk recorder/frame memory operation mode • Recalled file name (if reference channel is a disk recorder) • Current timecode, start point timecode, and stop point timecode 42