Sony XVS-7000 Users Guide - Page 307

Specifying the Region and Edit Points Region Selection Recalling regions to edit (numeric keypad control block) Select the region in which the editing is applied by the effect consisting of keyframes, using the region selection buttons in the numeric keypad control block. For details about region selection, see "Region selection in the numeric keypad control block" (page 305). Recalling regions to edit (menu) This is convenient for selecting some of the regions assigned to the numeric keypad control block or changing the reference region. Note The function of region selection buttons in the numeric keypad control block is linked to the menu. If you carry out region selection by pressing a region selection button, then the regions assigned to that button are selected. 1 Open the Key Frame >Region Select menu (6117). On the left of the status area, region selection buttons appear. The button text color varies as follows, according to the region selection state. Green text: The assigned regions include the reference region. Orange text: One of the assigned regions is selected. White text: No assigned region is selected. When multiple regions are assigned to the region selection buttons and any one or more of them is not selected, a red bar appears on the button. The [RCALL] and [STORE] buttons in the numeric keypad control block flash amber. 2 Press a button on the left of the status area, to select the button you want to assign. The regions assigned to the selected button appear on the right side of the status area. 3 In the group, press the button for the region you want to select, turning it on. 4 In the group, press the button you want to make the reference region. The selected button lights green. Edit Point Specification KF MCRO EDIT button Edit point specification buttons Editing buttons Utility/shotbox control block Press the [KF MCRO EDIT] button in the utility/shotbox control block to switch the memory recall buttons to keyframe/macro editing mode. 307