Sony XVS-7000 Users Guide - Page 466
Settings Relating to Video Switching, Setting the Active Area, Enabling/Disabling the Fade-to
View all Sony XVS-7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 466 highlights
5 Repeat steps 2 to 4 as required. 6 Press [Execute]. Setting the Active Area You can set a 3840×2160 or 4096×2160 active area for groups of four outputs when the signal format is 3840×2160P. Notes • On the XVS-9000, the active area cannot be set. • For AUX bus outputs set to [4096×2160], only an [4096×2160] input signal, black signal, or white signal can be selected. • For outputs set to [3840×2160], a [4096×2160] input signal cannot be selected. • [4096×2160] can be set for AUX bus outputs only. • [4096×2160] is supported on the XKS-S8165 SDI Output Connector Board only. 1 In the Engineering Setup >Switcher >Output menu (7333), press [Active Area Size]. The Active Area Size menu (7333.13) appears. 2 Select the target output to set. 3 In the group, select the active area. 3840×2160: Set to 3840×2160. 4096×2160: Set to 4096×2160. Settings Relating to Video Switching Enabling/Disabling the Fade-toBlack Function In the group of the Engineering Setup >Switcher >Transition menu (7334), select the program output. To enable fade to black, press [PGM1] to [PGM4], turning them on. Note The PGM2 to PGM4 settings are enabled in multi program mode or DSK mode only. Setting a Preset Color Mix 1 In the Engineering Setup >Switcher >Transition menu (7334), press [Preset Color Mix]. The Preset Color Mix menu (7334.1) appears. 2 In the group, select the target output to set. 3 In the group, select a stroke mode. Normal: Carry out a preset color mix with two transition operations. Single: Carry out a preset color mix with a single transition operation. Note In bus fixed mode, the setting is fixed to [Single]. 4 In the group, select the key state for a transition including a key. To execute a transition with the key state maintained, press [Key1] to [Key8], turning them on. 5 To return to the previous transition type setting each time a transition ends, press [One Time Enable], turning it on. Setting Fader Lever Operations This sets the relationship between the fader lever position and the progress state of the transition when executing a transition. 466